About a month ago i purchased two linear pushpull pots from realtone. (they were the only linear pushpulls i could find).
One crapped out after a few days (short circuit when turned up to 10).
Now the second one has crapped out with the same fault. Contact cleaner only made the problem worse.
Dont buy alpha pots!
Does anybody know where i can get linear pushpulls that arent alphas?
Alpha pots = Fail
Moderator: Capt. Black
- dylan
- Gibson
- Posts: 627
- meble-kuchenne.warszawa.pl
- Joined: Sat Sep 02, 2006 8:24 pm
- Location: Wanganui
- Has liked: 39 times
- Been liked: 25 times
Re: Alpha pots = Fail
Never had a problem with Alpha pots, use 'em all the time. I only use CTS and others in the odd case where I can't get an Alpha in the particular value/style I need.
THE AMP SHOP LTD
Boutique Amplifiers, Guitars & Effects
Repairs, Modifications & Custom Work
http://www.ampshop.co.nz
Boutique Amplifiers, Guitars & Effects
Repairs, Modifications & Custom Work
http://www.ampshop.co.nz
- dylan
- Gibson
- Posts: 627
- Joined: Sat Sep 02, 2006 8:24 pm
- Location: Wanganui
- Has liked: 39 times
- Been liked: 25 times
Re: Alpha pots = Fail
Possibly ive had two from the same bad batch then. The replacement that realtone sent me for the first faulty one is working fine.
Mids so haunting that demons took over my living room and now my guitar glows!
Re: Alpha pots = Fail
You could check on the current thats going through them as all pots have a rated maximum...
- alanp
- Vintage Post Junkie
- Posts: 4637
- Joined: Thu Dec 18, 2008 10:51 am
- Location: Wanganui
- Has liked: 4 times
- Been liked: 11 times
- Contact:
Re: Alpha pots = Fail
Never had a problem with any of the Alpha pots in my pedal or synth builds. But none of them are push-pull.
Capt. Black wrote:Call me if you're looking for the sound of a sows ear made from a silk purse with a side of hot bitches and alcohol
- dylan
- Gibson
- Posts: 627
- Joined: Sat Sep 02, 2006 8:24 pm
- Location: Wanganui
- Has liked: 39 times
- Been liked: 25 times
Re: Alpha pots = Fail
just an update on my experiences with alphas - the replacement that i got for the first faulty one lasted about a month before it went faulty like the other two, so i put the prs audio taper push/pull tone pot back in as a volume and it works perfectly.
so out of three alpha pushpulls, one lasted a week and the other two about a month.
they were the only pots ive ever had fail that couldnt be fixed with a squirt of contact cleaner - ive got guitars from the 80's where the pots are still fine.
so out of three alpha pushpulls, one lasted a week and the other two about a month.
they were the only pots ive ever had fail that couldnt be fixed with a squirt of contact cleaner - ive got guitars from the 80's where the pots are still fine.
Mids so haunting that demons took over my living room and now my guitar glows!
Re: Alpha pots = Fail
Dude, what are you going to these pots?!
THE AMP SHOP LTD
Boutique Amplifiers, Guitars & Effects
Repairs, Modifications & Custom Work
http://www.ampshop.co.nz
Boutique Amplifiers, Guitars & Effects
Repairs, Modifications & Custom Work
http://www.ampshop.co.nz
Re: Alpha pots = Fail
AmpShop wrote:Dude, what are you going to these pots?!
haha the mind boggles the eyes go blind!!!