Page 251 of 333

Re: Show us your pedalboard

Posted: Mon May 04, 2020 9:18 am
by Mini Forklift
Mini Forklift Ⓥ wrote:New board for me, just waiting for one last pedal to arrive. Will post a pic up early next week once it's all assembled
Well here it is, hoping to get some time this week to spend some time dialing in some sounds. I have my HH Electronic 'Multi Echo' tape in the FX Loop, advantage of this is that I can just turn it on whenever I want it :D

Image

Thanks to Timoes for the Fulltone Octave Fuzz and Matt at ToneLounge for the Pomeroy, appreciated

Re: Show us your pedalboard

Posted: Tue May 05, 2020 11:30 am
by Dano_NZ
Just updated with a few additions. May pull off the SD-1W.

Image

Re: Show us your pedalboard

Posted: Tue May 05, 2020 11:57 am
by robthemac
Dano_NZ wrote:Just updated with a few additions. May pull off the SD-1W.

Image


Hnnnng Flint...

Re: Show us your pedalboard

Posted: Wed May 06, 2020 12:08 pm
by Mini Forklift
Have this on the way from the fine gentleman that is Troy, damn I have had a bit of a spendy time lately

Image

Image

Going to replace the Marshall Guv'nor with it :thumbup:

Re: Show us your pedalboard

Posted: Fri May 08, 2020 10:23 am
by Mini Forklift
Thanks Troy aka JellyBelly, what a GC :thumbup:

Image

Re: Show us your pedalboard

Posted: Sun May 10, 2020 8:49 pm
by Candeevr4
Current iteration:

Image

Currently waiting on a couple of pedals from Toany and some bits from the rs and ill redo all the cables as they are almost all too short with the new pedalboard.

Re: Show us your pedalboard

Posted: Sat May 30, 2020 11:12 am
by Conway
Image

A Neunaber Slate is underneath providing reverb for the guitar signal on left channel and drums from the Boss RC-10R on the right (into a Hendriksen PA, which also takes the vocals from the TC Helicon).

Re: Show us your pedalboard

Posted: Mon Jun 01, 2020 3:11 pm
by jeremyb
Pedalboard I sold Candeevr4 back in my hands again, Rockboard Mod 1 patchbay has 5 TRS thru sockets, and I have it wired for in / out / effects send / effects receive, and soon to be the GA-FC controller once I have a couple more TRS plugs.

Budget power from a Caline P5 to power it all, and Harley Benton patch cables (which are the easiest ones in the universe to make).

The Infinity 2 and the Mosky Reverb are in the effects loop :)

Re: Show us your pedalboard

Posted: Thu Jun 04, 2020 6:32 pm
by Marshmallow
Conway wrote:I've downsized my main board from a PT3 to a Temple Board Duo 24. Got a few pedals to sell soon. And a mini number 2 board on a Temple Solo 18.

Image
Image
This is awesome! Box of rock kicks A**!

Re: Show us your pedalboard

Posted: Thu Jun 04, 2020 6:42 pm
by Marshmallow
Hi All,

I've ticked of all my list (list of Japanese pedals) for the time being and have adjusted my pedalboard. I will probably invest on a switcher next but this will be it for a while.

Feel free to research them. They usually don't have good demos but they sound awesome after trying most of the pedals available

Image

Image

Very simple but I'm satisfied.

Ever wonder what effects pedal shops in Japan look like?
Here's one.. just a small shop. You're welcome.

Image

Image

Re: Show us your pedalboard

Posted: Thu Jun 04, 2020 6:48 pm
by harveysj
Marshmallow wrote:Hi All,

I've ticked of all my list (list of Japanese pedals) for the time being and have adjusted my pedalboard. I will probably invest on a switcher next but this will be it for a while.

Feel free to research them. They usually don't have good demos but they sound awesome after trying most of the pedals available

Image

Image

Very simple but I'm satisfied.

Ever wonder what effects pedal shops in Japan look like?
Here's one.. just a small shop. You're welcome.

Image

Image
Got an 8 loop switcher with midi going if your keen

Re: Show us your pedalboard

Posted: Thu Jun 04, 2020 6:51 pm
by Slowy
Conway wrote:Image

A Neunaber Slate is underneath providing reverb for the guitar signal on left channel and drums from the Boss RC-10R on the right (into a Hendriksen PA, which also takes the vocals from the TC Helicon).
I just spent 10 minutes skimming an hour of videos telling me how easy the Zola was to use. At no point did I find where they stopped talking and actually made a sound. :crazy:

Re: Show us your pedalboard

Posted: Thu Jun 04, 2020 10:34 pm
by Candeevr4
Current:
Image

Signal path is into the board via the mod 2, into the compressor, into the es5, then the orion, bronson, rogue, texan and stratus are in the loops, the judge is after the es and the carbon copy is in the Katana's loop.

Es5 is controlling the Katana via midi(channel switching and turning effects off on patch changes) and the moog expression is controlling the Katana'svolume via midi through the es5.

Looking at a new tuner to replace the pitchblack and maybe adding a Joyo American Sound as the Darkglass options are a tad expensive...

Re: Show us your pedalboard

Posted: Thu Jun 04, 2020 11:02 pm
by rickenbackerkid
I recommend a tuner with 'sweetened' presets. I tune before gig and in breaks with a Peterson strobe tuner and it's honestly like a light bulb going on it makes such a massive difference. everything sounds sweeter and I don't have to tweak so much in between songs. I use the Peterson guitar preset with a couple of minor edits to suit my ear.

Re: Show us your pedalboard

Posted: Fri Jun 05, 2020 9:35 am
by hamo
rickenbackerkid wrote:I recommend a tuner with 'sweetened' presets. I tune before gig and in breaks with a Peterson strobe tuner and it's honestly like a light bulb going on it makes such a massive difference. everything sounds sweeter and I don't have to tweak so much in between songs. I use the Peterson guitar preset with a couple of minor edits to suit my ear.
Can you explain this a bit more Ben? I thought a tuner was a tuner.