Pedalboard tone suckage woes
Moderators: Slowy, Capt. Black
- Bg
- Site Admin
- Posts: 43360
- meble-kuchenne.warszawa.pl
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2269 times
- Been liked: 3930 times
Pedalboard tone suckage woes
And before JB jumps in accusing my moulded patch leads, please read on.
So have spent a bit of time today trying to figure out my tone suckage.
My pedalboard is now basically - guitar lead (freedom cable) - switchblade plus - guitar lead 2 (freedom cable) amp.
Tone suck.
guitar lead (freedom etc) amp, no suckage.
guitar lead 2 (freedom etc) amp, no suckage.
guitar lead (etc) - fuzziebro fuzz- guitar lead 2 - amp, suckage.
and vice versa.
I've not tried with any other pedal yet as I literally have a short fuse nowadays when it comes to things like this not working (playing through the Pod Go instead). I should probably try two different guitar leads (etc) but they're all in the basement, and I was hoping somebody would give me an answer without me needing to move further than necessary.
Hive mind please?
So have spent a bit of time today trying to figure out my tone suckage.
My pedalboard is now basically - guitar lead (freedom cable) - switchblade plus - guitar lead 2 (freedom cable) amp.
Tone suck.
guitar lead (freedom etc) amp, no suckage.
guitar lead 2 (freedom etc) amp, no suckage.
guitar lead (etc) - fuzziebro fuzz- guitar lead 2 - amp, suckage.
and vice versa.
I've not tried with any other pedal yet as I literally have a short fuse nowadays when it comes to things like this not working (playing through the Pod Go instead). I should probably try two different guitar leads (etc) but they're all in the basement, and I was hoping somebody would give me an answer without me needing to move further than necessary.
Hive mind please?
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- jeremyb
- Chorus of Organs
- Posts: 41471
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7837 times
- Been liked: 4227 times
Re: Pedalboard tone suckage woes
Guitar lead 2 is likely faulty, my guess is either poor shield connection on one of the plugs, or a light short to earth, or something else in the cable thats perhaps causing a rise in capacitance which is then killing your toan.
Check the resistance from tip to sleeve on both ends, as well as tip to tip and sleeve to sleeve, if they're all zero then check the solder connections look ok, wire not frayed etc...
Check the resistance from tip to sleeve on both ends, as well as tip to tip and sleeve to sleeve, if they're all zero then check the solder connections look ok, wire not frayed etc...
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- NippleWrestler
- Vintage Post Junkie
- Posts: 2946
- Joined: Sat Jan 02, 2016 5:05 pm
- Has liked: 81 times
- Been liked: 1079 times
Re: Pedalboard tone suckage woes
depending on the pedal's bypass, you can lose high end (tone suck) that way.
- Bg
- Site Admin
- Posts: 43360
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2269 times
- Been liked: 3930 times
Re: Pedalboard tone suckage woes
yeah I know that, just perplexed why a Switchblade Plus would be killing tone when its not got a reputation for being a tone sucker, this was just through the switchblade... no pedals attached. Both freedom cables fine by themselves.
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- rickenbackerkid
- Vintage Post Junkie
- Posts: 6739
- Joined: Thu Apr 28, 2005 1:52 pm
- Has liked: 210 times
- Been liked: 662 times
Re: Pedalboard tone suckage woes
In theory, 2 cables is doubling the capacitance, and if the switchblade/fuzz is a true bypass, then you're running through two cables. Solution is a buffered pedal.
However, if your hearing tone suckle from just two cables, either sounding is wrong or you have the ears of a god, because I certainly couldn't hear that. Unless the cables are coilies?
However, if your hearing tone suckle from just two cables, either sounding is wrong or you have the ears of a god, because I certainly couldn't hear that. Unless the cables are coilies?
- Bg
- Site Admin
- Posts: 43360
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2269 times
- Been liked: 3930 times
Re: Pedalboard tone suckage woes
I have ears of lead, so yeah its monstrous if I can hear itrickenbackerkid wrote: ↑Wed Oct 11, 2023 7:16 pm In theory, 2 cables is doubling the capacitance, and if the switchblade/fuzz is a true bypass, then you're running through two cables. Solution is a buffered pedal.
However, if your hearing tone suckle from just two cables, either sounding is wrong or you have the ears of a god, because I certainly couldn't hear that. Unless the cables are coilies?
1st test, go and get more leads from the basement.
2nd test, buy some new leads - all of mine are freedom cables made by Rob, that gives you an idea how old they are.
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- Bg
- Site Admin
- Posts: 43360
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2269 times
- Been liked: 3930 times
Re: Pedalboard tone suckage woes
is it odd that lead 2 sounds fine straight to the amp though?
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- robthemac
- Vintage Post Junkie
- Posts: 8764
- Joined: Sun Apr 28, 2019 3:47 pm
- Has liked: 1124 times
- Been liked: 1444 times
- Cdog
- Vintage Post Junkie
- Posts: 4389
- Joined: Wed Feb 07, 2007 3:01 pm
- Location: Christchurch
- Has liked: 3530 times
- Been liked: 724 times
Re: Pedalboard tone suckage woes
This!rickenbackerkid wrote: ↑Wed Oct 11, 2023 7:16 pm 2 cables is doubling the capacitance, and if the switchblade/fuzz is a true bypass, then you're running through two cables. Solution is a buffered pedal.
- Bg
- Site Admin
- Posts: 43360
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2269 times
- Been liked: 3930 times
Re: Pedalboard tone suckage woes
So where to put the buffer, in front of the switchblade as its the first (and only pedal at the moment), and will it fuck up my geranium pedals as apparently they like to be first at everything, not least the chelsea flower show.
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
-
- Vintage Post Junkie
- Posts: 2763
- Joined: Fri May 21, 2010 10:08 pm
- Has liked: 8 times
- Been liked: 251 times
Re: Pedalboard tone suckage woes
I’ve had bad experiences with pedals like switch blade sucking tone. I fixed (at the time) by using a boss tuner as the first pedal because it is buffered
- Cdog
- Vintage Post Junkie
- Posts: 4389
- Joined: Wed Feb 07, 2007 3:01 pm
- Location: Christchurch
- Has liked: 3530 times
- Been liked: 724 times
Re: Pedalboard tone suckage woes
Buffer early in the chain. When I had a germanium fuzz on the board, I buffered right after it. Like kiwiaxe, I just used a boss tuner.
- jeremyb
- Chorus of Organs
- Posts: 41471
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7837 times
- Been liked: 4227 times
Re: Pedalboard tone suckage woes
If you had another lead handy you could A/B them with the switchblade
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- Bg
- Site Admin
- Posts: 43360
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2269 times
- Been liked: 3930 times
Re: Pedalboard tone suckage woes
The irony being that the switchblade has a 'tuner out'
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.