attention pedal builders

Kloppsta · Post by **Kloppsta** » Sat Jan 08, 2011 8:10 pm

ive noticed there are lots of the nzg massive making their own pedals these days so im hoping that one of you uber genius electronical wizards would be able to build this for me? (last time i used a soldering iron i burnt a hole in my carpet and a "cap" to me is something you wear on your head)

its a 1977 Op Amp Big Muff.

drop me a pm if youre keen to have a crack! cheers

(couldnt attatch pdf file for some reason but i have the original pdf available if needed)

: BM2.jpg (9.83 KiB) Viewed 2746 times

Kloppsta · Post by **Kloppsta** » Sat Jan 08, 2011 8:10 pm

: BM4.jpg (11.46 KiB) Viewed 2745 times

TmcB · Post by **TmcB** » Fri Aug 05, 2011 3:00 pm

Did anyone ever build this for you?
I could be keen to give it a crack.

rocklander · Post by **rocklander** » Fri Aug 05, 2011 3:06 pm

thought you couldn't etch?

TmcB · Post by **TmcB** » Fri Aug 05, 2011 3:15 pm

I'd vero that sucka like nothing. But that was going to be my great reveal.

rocklander · Post by **rocklander** » Fri Aug 05, 2011 3:55 pm

ah right.. well you should do it anyway!

.. but, yeah.. I built that one... at least I think I did... did I?

yeah, nah I did.. that's right ..I found some old stock opamps for Kloppsta to try and mess around with.

TmcB · Post by **TmcB** » Fri Aug 05, 2011 4:10 pm

Yeah, I might. Gonna stick a bandaxall/james tone control in instead of the tone, and see where that gets me.

jeremyb · Post by **jeremyb** » Fri Aug 05, 2011 4:16 pm

I'll make you a pcb if you get stuck Tony

pete_currie · Post by **pete_currie** » Sat Aug 06, 2011 4:10 am

TmcB wrote:Yeah, I might. Gonna stick a bandaxall/james tone control in instead of the tone, and see where that gets me.

FWIW a baxandall or james tonestack has quite a high amount of loss, and is usually followed by a recovery stage.

TmcB · Post by **TmcB** » Sat Aug 06, 2011 8:45 am

pete_currie wrote:
TmcB wrote:Yeah, I might. Gonna stick a bandaxall/james tone control in instead of the tone, and see where that gets me.
FWIW a baxandall or james tonestack has quite a high amount of loss, and is usually followed by a recovery stage.

Yeah, but the way the muff works it has a hefty gain stage after the tone control anyway as the stock control is also super lossy. Fingers crossed it works.

NZGuitars.com : Filling you with GAS since 2003