LED question
Moderators: Slowy, Capt. Black
-
- Mr Echo
- Posts: 4477
- meble-kuchenne.warszawa.pl
- Joined: Wed Jun 08, 2005 7:33 am
- Location: East Coast
- Has liked: 358 times
- Been liked: 283 times
LED question
Hi, maybe a dumb question but,
I'm making a pedal for a friend who is legally , but not entirely blind.
His main beef is seeing the pedal,
I thought maybe multiple LEDs around the switch,, like a landing strip at an airport at night.
can you install multiple LEDs?
Can they all run off the same " out" on a pcb designed for the led/s or am I needing to rig some
Other power source for multiple LEDs?
I'm making a pedal for a friend who is legally , but not entirely blind.
His main beef is seeing the pedal,
I thought maybe multiple LEDs around the switch,, like a landing strip at an airport at night.
can you install multiple LEDs?
Can they all run off the same " out" on a pcb designed for the led/s or am I needing to rig some
Other power source for multiple LEDs?
"Cash on the ballot, money to burn, Dealey Plaza, make a left-hand turn" Bob Dylan is a genius
- willow13
- Vintage Post Junkie
- Posts: 14558
- Joined: Sun Dec 19, 2004 2:36 pm
- Location: If less is more then just think how much more more is
- Has liked: 372 times
- Been liked: 634 times
Re: LED question
I now nothing about this but what about those LED strips??? they only need 1 power source so maybe they'd do??
If Less is More Then Just Think How Much More More would be
-
- Mr Echo
- Posts: 4477
- Joined: Wed Jun 08, 2005 7:33 am
- Location: East Coast
- Has liked: 358 times
- Been liked: 283 times
Re: LED question
Led strips? Dunno please illuminate me,,,
You mean like the Christmas decoration?
You mean like the Christmas decoration?
"Cash on the ballot, money to burn, Dealey Plaza, make a left-hand turn" Bob Dylan is a genius
- willow13
- Vintage Post Junkie
- Posts: 14558
- Joined: Sun Dec 19, 2004 2:36 pm
- Location: If less is more then just think how much more more is
- Has liked: 372 times
- Been liked: 634 times
Re: LED question
Kev77 wrote:illuminate
https://www.google.co.nz/search?q=led+s ... 35&bih=618
http://www.ledwarehouse.co.nz/nz/index. ... pgodTlcAzA
again I have no idea what they are/do but meh
If Less is More Then Just Think How Much More More would be
- Snarblinge
- Ashton
- Posts: 274
- Joined: Mon Apr 27, 2009 7:39 pm
- Has liked: 34 times
- Been liked: 43 times
Re: LED question
You can use as many as you like, you do increase the chance of a thump on switch on, due to the current change, so separate power could be good, but ,may not be required. The only other issue is the amount of power you will suck, not too good on bat power. Also use low value limit resistors to get maximum brightness, around 400ohm is usually ok for most super brights. And use white or yellow clear lens LEDs to up brightness. Check with your guy what he sees best.post pics
b.
-
- Mr Echo
- Posts: 4477
- Joined: Wed Jun 08, 2005 7:33 am
- Location: East Coast
- Has liked: 358 times
- Been liked: 283 times
Re: LED question
Snarblinge wrote:You can use as many as you like, you do increase the chance of a thump on switch on, due to the current change, so separate power could be good, but ,may not be required. The only other issue is the amount of power you will suck, not too good on bat power. Also use low value limit resistors to get maximum brightness, around 400ohm is usually ok for most super brights. And use white or yellow clear lens LEDs to up brightness. Check with your guy what he sees best.post pics
Great advice, thanks.
"Cash on the ballot, money to burn, Dealey Plaza, make a left-hand turn" Bob Dylan is a genius
-
- Vintage Post Junkie
- Posts: 20729
- Joined: Wed Sep 07, 2005 12:08 pm
- Location: Wellington, NZ
- Has liked: 638 times
- Been liked: 807 times
Re: LED question
Make it look like Iron Man's arc reactor.
Aquila Rosso wrote:I don't a mind an iced tea rimjob one little bit
Molly wrote:Trousers are no substitute for talent
druz wrote:I present to you, the whogivesafuckocaster
-
- Mr Echo
- Posts: 4477
- Joined: Wed Jun 08, 2005 7:33 am
- Location: East Coast
- Has liked: 358 times
- Been liked: 283 times
Re: LED question
Ha, read my mind JARVIShamo wrote:Make it look like Iron Man's arc reactor.
"Cash on the ballot, money to burn, Dealey Plaza, make a left-hand turn" Bob Dylan is a genius
- sizzlingbadger
- Vintage Post Junkie
- Posts: 8274
- Joined: Sat Jan 15, 2011 7:12 am
- Location: Wire Wrapper
- Has liked: 1210 times
- Been liked: 1401 times
Re: LED question
what about these light plates http://www.diystompboxes.com/wpress/?p=207 would they be any good ?
DIY version http://www.diystompboxes.com/smfforum/i ... ic=66840.0
[youtube]http://www.youtube.com/watch?v=N6bxAOcU ... age#t=454s[/youtube]
DIY version http://www.diystompboxes.com/smfforum/i ... ic=66840.0
[youtube]http://www.youtube.com/watch?v=N6bxAOcU ... age#t=454s[/youtube]
Tube amp and guitar tones straight from 1958… amazing how believable the sounds were back then, even without the modellers...