Having issues with my Barber DD

Pedal manufacturers in here...

Moderators: Slowy, Capt. Black

Post Reply
User avatar
Reg18
Vintage Post Junkie
Vintage Post Junkie
Posts: 3687
meble-kuchenne.warszawa.pl
Joined: Thu Feb 06, 2014 1:57 pm
Has liked: 318 times
Been liked: 935 times

Having issues with my Barber DD

Post by Reg18 »

My Barber Compact DD sounds great when it's going....but right now it isint!
for the last 2 months or more it has needed 2 clicks of the footswitchs to turn it on, sometimes it would switch on but be at half volume, and other times nothing. Now it has got to the point where it won't switch on at all, and I'm assuming it is not true bypass because it doesn't pass signal when in bypass either.
I have put some contact cleaner down the footswitchs but this didn't help.

I would assume this is a footswitch issue but I'm unsure. Everything looks in place inside the pedal.
Anyone have any ideas?

Image

User avatar
Snarblinge
Ashton
Ashton
Posts: 274
Joined: Mon Apr 27, 2009 7:39 pm
Has liked: 34 times
Been liked: 43 times

Re: Having issues with my Barber DD

Post by Snarblinge »

It is true bypass, as evidenced by the switch.

I'm happy to have a look at it for you if you can get it to me. I'm in avondale ak.

Or if you are diy keen and have an iron, can provide some trouble shooting steps.

Sounds like it is either the switch, or maybe power. Not familiar with the pedal. But does the led switch on and off ok? Does it flicker?
2nd thoughts if it isn't working in bypass, it's def. the switch.
b.

User avatar
Snarblinge
Ashton
Ashton
Posts: 274
Joined: Mon Apr 27, 2009 7:39 pm
Has liked: 34 times
Been liked: 43 times

Re: Having issues with my Barber DD

Post by Snarblinge »

Quick read of the barber site. They claim to use solid core wire to the switch. Sometimes solid core doesn't handle the knocks too well it may just be a wire you need to replace. Have you got a meter with a continuity test option?
b.

User avatar
Snarblinge
Ashton
Ashton
Posts: 274
Joined: Mon Apr 27, 2009 7:39 pm
Has liked: 34 times
Been liked: 43 times

Re: Having issues with my Barber DD

Post by Snarblinge »

Also slim chance it could be one of the jacks at fault. Check the two blue wires at the switch to the other end of a cable plugged in. That will tell you
b.

User avatar
Reg18
Vintage Post Junkie
Vintage Post Junkie
Posts: 3687
Joined: Thu Feb 06, 2014 1:57 pm
Has liked: 318 times
Been liked: 935 times

Re: Having issues with my Barber DD

Post by Reg18 »

I've got a soldering iron but no multi metre. LED turns off and on as usual. If it was true bypass would it still pass signal if the switch is faulty?

User avatar
jeremyb
Chorus of Organs
Posts: 41192
Joined: Sat Dec 06, 2008 9:03 am
Has liked: 7750 times
Been liked: 4188 times

Re: Having issues with my Barber DD

Post by jeremyb »

Sounds like a faulty switch, $15 from jaycar for a new one and a bit of time soldering :)
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.

User avatar
Cdog
Vintage Post Junkie
Vintage Post Junkie
Posts: 4377
Joined: Wed Feb 07, 2007 3:01 pm
Location: Christchurch
Has liked: 3501 times
Been liked: 717 times

Re: Having issues with my Barber DD

Post by Cdog »

jeremyb wrote:Sounds like a faulty switch, $15 from jaycar for a new one and a bit of time soldering :)
^this. happy to take a look at it for ya sometime if ya like mate

User avatar
Reg18
Vintage Post Junkie
Vintage Post Junkie
Posts: 3687
Joined: Thu Feb 06, 2014 1:57 pm
Has liked: 318 times
Been liked: 935 times

Re: Having issues with my Barber DD

Post by Reg18 »

Cdog wrote:
jeremyb wrote:Sounds like a faulty switch, $15 from jaycar for a new one and a bit of time soldering :)
^this. happy to take a look at it for ya sometime if ya like mate
I think that's the best place to start, should be able to manage this one myself.

User avatar
Cdog
Vintage Post Junkie
Vintage Post Junkie
Posts: 4377
Joined: Wed Feb 07, 2007 3:01 pm
Location: Christchurch
Has liked: 3501 times
Been liked: 717 times

Re: Having issues with my Barber DD

Post by Cdog »

cool :)

User avatar
rickenbackerkid
Vintage Post Junkie
Vintage Post Junkie
Posts: 6723
Joined: Thu Apr 28, 2005 1:52 pm
Has liked: 209 times
Been liked: 657 times

Re: Having issues with my Barber DD

Post by rickenbackerkid »

Sounds like a faulty switch, email Barber. He may even send you a freebie

Post Reply