Amp Build + Mods

Amp tinkerers and people who aren't afraid of 700 volts or so in here....

Moderators: Slowy, Capt. Black

Marshmallow
Vintage Post Junkie
Vintage Post Junkie
Posts: 1137
meble-kuchenne.warszawa.pl
Joined: Sun Jan 10, 2016 7:46 am
Location: Auckland/Tokyo
Has liked: 188 times
Been liked: 900 times

Amp Build + Mods

Post by Marshmallow »

Hi All,

A few weeks ago, I decided to build an amp with the help of an awesome guy named Rhys. note* 2 cameras are used in this process (Home + phone cam). I decided to make one here as I'm going to Japan. Rather have an amp made in nz for when I head there.

I started a thread for my own reference. feel free to comment. FIrst post is from 14-30 dec.

It will be based on Steve Luckey 5e3 but completely ditching the diagram but rather, read off the schematic as it could be made simpler.. + twin preamp later on.

Black board bought from Mable Audio. Turrets, sockets, fuse holder etc..Filter caps from USA.

Let's start:
Main turret:
Image

Image

Wiring strapped around turrets. allow to heat turrets for 20s before soldering. Do not move wiring otherwise it will cause dry joint. Note: Complete all flying leads before installing components.

Image

3 pcs aluminium folded chassis etc. won't provide too many photos as I don't want to flood the page.

Image

Image

Mount componets: Filter caps installed later on the date

Image

fit on chassis (will be taken off when output transformer arrives)

I have split the 12AY7 cathodes for the robrobinette "5E3 Lead channel mod"
at a later stage. It will also be easy to change this 1st stage into a fender twin pre-amp on V1
again at a later stage.

two more of robinette's Mods,

1 = Master Volume in place of R15 referring to Steve Luckey 5E3 schematic.

2 = 3 way switched feedback--normal/no cathode bypass/feedback. again referring
to the same drawings centered around V2-A pin 3--C5--R13.
Cathode Bias + LED PILOT LIGHT

Other changes done, C2 and C3 are .047uf. In the wires going to each 6V6 pin 4 are now 470 ohm 3 watt resistors.

Image
Last edited by Marshmallow on Thu Jan 04, 2018 6:45 pm, edited 3 times in total.

Marshmallow
Vintage Post Junkie
Vintage Post Junkie
Posts: 1137
Joined: Sun Jan 10, 2016 7:46 am
Location: Auckland/Tokyo
Has liked: 188 times
Been liked: 900 times

Re: Amp Build + Mods

Post by Marshmallow »

From Today:
Now that holiday is finished I am now working on the amp in my bedroom in the City. Output transformer arrived. Still don't have a power transformer. Most parts mounted. Labels are for when I install the Japanese or NZ transformer.

More mods - external bias testing.

Where do you guys get those bottle type valves? Does anyone have a cheap 5e3 POWER transformer for sale?

Image

Power Section
Image

Image

Most bits have been wired up. Just literally need a power transformer and hook up the rest of the output transformer wires to the valve sockets, power supply and the speaker. I also need to wire the switch and input jacks.

Image

Will do more work tomorrow!

User avatar
Jay
Vintage Post Junkie
Vintage Post Junkie
Posts: 7761
Joined: Sat Sep 25, 2010 9:35 pm
Has liked: 1630 times
Been liked: 1297 times

Re: 5e3 Build + Mods to Twin Preamp

Post by Jay »

Cool, looks tidy with good solder joints. Do you have a circuit diagram of your build?
When faced with quality, I recognise it every time.

Marshmallow
Vintage Post Junkie
Vintage Post Junkie
Posts: 1137
Joined: Sun Jan 10, 2016 7:46 am
Location: Auckland/Tokyo
Has liked: 188 times
Been liked: 900 times

Re: 5e3 Build + Mods to Twin Preamp

Post by Marshmallow »

jvpp wrote:Cool, looks tidy with good solder joints. Do you have a circuit diagram of your build?
Hey man. Thanks! I practised soldering before I started. No diagram as the build is straight off steve luckey's schematic but I am documenting everything as I go.. where the wires go, measurements, and every step etc... It's 24 turrets each side. Earth bus is copper wire. pots are A1M

User avatar
jeremyb
Chorus of Organs
Posts: 40878
Joined: Sat Dec 06, 2008 9:03 am
Has liked: 7685 times
Been liked: 4157 times

Re: Amp Build + Mods

Post by jeremyb »

Awesome work man!
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.

User avatar
Molly
Vintage Post Junkie
Vintage Post Junkie
Posts: 24937
Joined: Sat Dec 21, 2013 12:17 pm
Has liked: 2482 times
Been liked: 2794 times

Re: Amp Build + Mods

Post by Molly »

As ever, blown away with this stuff. If I had these skills (and the time) I'd rip out the PCB from my Bluesbreaker and just make something cool too.

User avatar
Jellybelly
PRS
PRS
Posts: 938
Joined: Fri Jul 15, 2016 7:10 am
Has liked: 238 times
Been liked: 113 times

Re: Amp Build + Mods

Post by Jellybelly »

Shit that is sharp 8)
Sooooo sharp 8)

User avatar
StrummersOfThunder
Vintage Post Junkie
Vintage Post Junkie
Posts: 7161
Joined: Sun Jul 15, 2012 2:23 pm
Has liked: 808 times
Been liked: 1295 times

Re: Amp Build + Mods

Post by StrummersOfThunder »

Nice and tidy mate! looking good

Mini Forklift

Re: Amp Build + Mods

Post by Mini Forklift »

Super jealous. Damn that is great, props to you. What an accomplishment once it's finished!

User avatar
AiRdAd
Vintage Post Junkie
Vintage Post Junkie
Posts: 7691
Joined: Sat Jul 04, 2009 2:33 pm
Has liked: 57 times
Been liked: 696 times

Re: Amp Build + Mods

Post by AiRdAd »

That looks awesome.! The master and feed back switches sound like a really good idea too
Slowy wrote: To Danny, everyone is either a supplier, customer or a courier.

User avatar
Olderama
Vintage Post Junkie
Vintage Post Junkie
Posts: 7007
Joined: Sun Dec 22, 2013 8:04 pm
Has liked: 971 times
Been liked: 876 times

Re: Amp Build + Mods

Post by Olderama »

It's upside down doh............





Nice work :)
:mental:

Marshmallow
Vintage Post Junkie
Vintage Post Junkie
Posts: 1137
Joined: Sun Jan 10, 2016 7:46 am
Location: Auckland/Tokyo
Has liked: 188 times
Been liked: 900 times

Re: Amp Build + Mods

Post by Marshmallow »

Olderama wrote:It's upside down doh............





Nice work :)

Haha cheers! I don't know why but I always prefer the valves facing up than a reversed or top mounted chassis.

Won't be doing any work today. Probably over the weekend! Will keep you guys updated. any old 5e3 transformers for sale? or any 5e3 transformers at all?

User avatar
griff
Vintage Post Junkie
Vintage Post Junkie
Posts: 1743
Joined: Sun Feb 12, 2017 6:57 pm
Has liked: 498 times
Been liked: 247 times

Re: Amp Build + Mods

Post by griff »


Marshmallow
Vintage Post Junkie
Vintage Post Junkie
Posts: 1137
Joined: Sun Jan 10, 2016 7:46 am
Location: Auckland/Tokyo
Has liked: 188 times
Been liked: 900 times

Re: Amp Build + Mods

Post by Marshmallow »

Thanks man!

User avatar
griff
Vintage Post Junkie
Vintage Post Junkie
Posts: 1743
Joined: Sun Feb 12, 2017 6:57 pm
Has liked: 498 times
Been liked: 247 times

Re: Amp Build + Mods

Post by griff »

No worries. I threw one in my Jet City. Sounds awesome. Very fair pricing too!

Post Reply