Making a new nut for a Gretsch 6120DSW
Moderators: Slowy, Capt. Black
- Jay
- Vintage Post Junkie
- Posts: 7808
- meble-kuchenne.warszawa.pl
- Joined: Sat Sep 25, 2010 9:35 pm
- Has liked: 1634 times
- Been liked: 1300 times
Making a new nut for a Gretsch 6120DSW
The Gretsch 6120 DSW comes with a standard brass nut. Sadly enough the nut on this guitar was 'buggered'. Some DIY selver must have a had a go at with a chainsaw or so judging by the look of the string slots. The effect was that the guitar just did not stay in tune.
Starting with a Pack and Save bit of cow bone, properly 'defatted', I cut out a rough shape that is slightly bigger than the original brass nut.
Second cut with the hacksaw
Now I have a rough blank...
Sanding it down to the right thickness so it fits 'tightly' in the existing nut space...
Filing and sanding it into final shape. Putting a pencil marker on it which follows the curve of the fretboard. This will tell me how much I need to sand off the nut bottom to achieve the action I want.
Cutting the string slots. I don't have a sophisticated set of Stewmac files. I use my own secret weapons
And here a nice new bone nut with my preferred string spacing and action. No more tuning issues. Happy as Larry.
Starting with a Pack and Save bit of cow bone, properly 'defatted', I cut out a rough shape that is slightly bigger than the original brass nut.
Second cut with the hacksaw
Now I have a rough blank...
Sanding it down to the right thickness so it fits 'tightly' in the existing nut space...
Filing and sanding it into final shape. Putting a pencil marker on it which follows the curve of the fretboard. This will tell me how much I need to sand off the nut bottom to achieve the action I want.
Cutting the string slots. I don't have a sophisticated set of Stewmac files. I use my own secret weapons
And here a nice new bone nut with my preferred string spacing and action. No more tuning issues. Happy as Larry.
When faced with quality, I recognise it every time.
- GrantB
- ADMIN
- Posts: 15906
- Joined: Fri Oct 31, 2003 9:04 am
- Location: Where I need to be
- Has liked: 1360 times
- Been liked: 2098 times
Re: Making a new nut for a Gretsch 6120DSW
Nice work!
"Man is the most insane species. He worships an invisible god and destroys a visible nature. Unaware that this nature he's destroying is this god he's worshipping." - Hubert Reeves
- bender
- Darth Fader
- Posts: 11856
- Joined: Fri Feb 02, 2007 12:46 pm
- Location: Dorkland
- Has liked: 416 times
- Been liked: 1016 times
- JHorner
- Vintage Post Junkie
- Posts: 3167
- Joined: Wed Nov 12, 2014 5:45 pm
- Location: Auckland
- Has liked: 394 times
- Been liked: 488 times
Re: Making a new nut for a Gretsch 6120DSW
Aw man and here I was feeling proud of myself for soldering up a patch cable instead of buying one.
Go on, tell us.I use my own secret weapons
- JHorner
- Vintage Post Junkie
- Posts: 3167
- Joined: Wed Nov 12, 2014 5:45 pm
- Location: Auckland
- Has liked: 394 times
- Been liked: 488 times
Re: Making a new nut for a Gretsch 6120DSW
Would you be happier if the strings were sitting a bit prouder instead of so deep in the slots?jvpp wrote:And here a nice new bone nut with my preferred string spacing and action. No more tuning issues. Happy as Larry.
When I went from playing pointy locking nut guitars to a les paul I was a bit weirded out at first that the string is just kind of resting on top of the slot, but now I can see the logic that it means there's no real opportunity for the string to bind in the slot.
- Jay
- Vintage Post Junkie
- Posts: 7808
- Joined: Sat Sep 25, 2010 9:35 pm
- Has liked: 1634 times
- Been liked: 1300 times
Re: Making a new nut for a Gretsch 6120DSW
It is hard to see from that photo. I cut the slots progressively deeper for diminishing string thickness. The E is half 'in' and the e and b are the 'deepest' but still close to the top. That way they won't pop out during bends. But you observed this very well as I took a shortcut to set the nut action by deepening the slot. I still have to sand a bit of the top but haven't got to it yet.JHorner wrote:jvpp wrote:And here a nice new bone nut with my preferred string spacing and action. No more tuning issues. Happy as Larry.
Would you be happier if the strings were sitting a bit prouder instead of so deep in the slots?
When I went from playing pointy locking nut guitars to a les paul I was a bit weirded out at first that the string is just kind of resting on top of the slot, but now I can see the logic that it means there's no real opportunity for the string to bind in the slot.
When faced with quality, I recognise it every time.
- Bg
- Site Admin
- Posts: 43309
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2264 times
- Been liked: 3909 times
Re: Making a new nut for a Gretsch 6120DSW
nice work stewmac sell a load of unneeded tools
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- Jay
- Vintage Post Junkie
- Posts: 7808
- Joined: Sat Sep 25, 2010 9:35 pm
- Has liked: 1634 times
- Been liked: 1300 times
Re: Making a new nut for a Gretsch 6120DSW
Thanks for the compliments guys.
I forgot you question mr Horner...
I forgot you question mr Horner...
As I said not very sophisticated, but it works really well...so start thinking about serrated knifes...Postby JHorner » Sat Apr 09, 2016 8:55 pm
Aw man and here I was feeling proud of myself for soldering up a patch cable instead of buying one.
I use my own secret weapons
Go on, tell us.
When faced with quality, I recognise it every time.
- Bg
- Site Admin
- Posts: 43309
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2264 times
- Been liked: 3909 times
Re: Making a new nut for a Gretsch 6120DSW
Somewhere I have a video of dan erlewhine with a popsicle stick and a guitar string glued to it.... Which is a great idea until you get to the unwound strings.
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- JHorner
- Vintage Post Junkie
- Posts: 3167
- Joined: Wed Nov 12, 2014 5:45 pm
- Location: Auckland
- Has liked: 394 times
- Been liked: 488 times
Re: Making a new nut for a Gretsch 6120DSW
The only trick i know with a popsicle stick is that if you dip it soapy water you can use it to get a perfect finish on your silicon bead. Yes it is better than using your finger.
- AiRdAd
- Vintage Post Junkie
- Posts: 7731
- Joined: Sat Jul 04, 2009 2:33 pm
- Has liked: 57 times
- Been liked: 698 times
Re: Making a new nut for a Gretsch 6120DSW
Well done. The nut on one of my guitars had the strings too low in places. It could probably do with a new nut. I was planning on putting some shims underneath to make it higher. Looking at your work, I feel guilty doing that now!!!
Slowy wrote: To Danny, everyone is either a supplier, customer or a courier.
- Jay
- Vintage Post Junkie
- Posts: 7808
- Joined: Sat Sep 25, 2010 9:35 pm
- Has liked: 1634 times
- Been liked: 1300 times
Re: Making a new nut for a Gretsch 6120DSW
Don't feel guilty, I do that too when I cannot be bothered to cut a whole new nut . Look at the fourth photo. See that thin bit of bone? I always keep those for a 'quick one'! Supergluing bone is sooo easy. I'll dig a pic up of one I recently did.AiRdAd wrote:Well done. The nut on one of my guitars had the strings too low in places. It could probably do with a new nut. I was planning on putting some shims underneath to make it higher. Looking at your work, I feel guilty doing that now!!!
When faced with quality, I recognise it every time.
- Jay
- Vintage Post Junkie
- Posts: 7808
- Joined: Sat Sep 25, 2010 9:35 pm
- Has liked: 1634 times
- Been liked: 1300 times
Re: Making a new nut for a Gretsch 6120DSW
Don't feel guilty, look at that shimAiRdAd wrote:Well done. The nut on one of my guitars had the strings too low in places. It could probably do with a new nut. I was planning on putting some shims underneath to make it higher. Looking at your work, I feel guilty doing that now!!!
Probably looks worse cause this phot is huge...
When faced with quality, I recognise it every time.