Building an archtop of some sorts

Self built and self assembly ;)

Moderators: Slowy, Capt. Black

User avatar
Jay
Vintage Post Junkie
Vintage Post Junkie
Posts: 7760
meble-kuchenne.warszawa.pl
Joined: Sat Sep 25, 2010 9:35 pm
Has liked: 1630 times
Been liked: 1297 times

Building an archtop of some sorts

Post by Jay »

May as well post the occasional update in its own thread rather than putting things in "Just Saying".

After the feedback from BG and others I have bought a cylinder rotary rasp. It really takes the edge away in a hurry on a high speed drill :D

Borrowed a grinder as the Bunnings suggested one was sold out in my local shop. Couldn't be bothered to drive towards Remmers for the next Bunnings.

I'll buy the grinder flap thingy tomorrow for removing the flatter areas.

So I focused on one horn and looks like it is going to be quite an arch. Totally unlike a Gretsch, or at least the one that I have. May have to start with a thinner board next time... Sigh!

Anyone knows what the typical archtop board thickness is prior to starting carving?


Image

See that blimmin knot? What a pain to carve that.

Image
When faced with quality, I recognise it every time.

User avatar
dayl
Vintage Post Junkie
Vintage Post Junkie
Posts: 5253
Joined: Tue Sep 02, 2008 6:40 pm
Has liked: 446 times
Been liked: 384 times

Re: Building an archtop of some sorts

Post by dayl »

Nice. Keep the updates rolling

User avatar
robnobcorncob
Vintage Post Junkie
Vintage Post Junkie
Posts: 4630
Joined: Fri Aug 31, 2007 10:22 pm
Has liked: 122 times
Been liked: 103 times

Re: Building an archtop of some sorts

Post by robnobcorncob »

jvpp wrote:
Anyone knows what the typical archtop board thickness is prior to starting carving?
1 inch according Bob Benedetto's "Making an Archtop Guitar" book.

User avatar
Jay
Vintage Post Junkie
Vintage Post Junkie
Posts: 7760
Joined: Sat Sep 25, 2010 9:35 pm
Has liked: 1630 times
Been liked: 1297 times

Re: Building an archtop of some sorts

Post by Jay »

robnobcorncob wrote:
jvpp wrote:
Anyone knows what the typical archtop board thickness is prior to starting carving?
1 inch according Bob Benedetto's "Making an Archtop Guitar" book.
Interesting, his tops look deceptively flat. I started with 20mm but have kept the pickup area flat all the way to the neck, hence the more pronounced horn arch.
When faced with quality, I recognise it every time.

User avatar
bender
Darth Fader
Posts: 11838
Joined: Fri Feb 02, 2007 12:46 pm
Location: Dorkland
Has liked: 415 times
Been liked: 1010 times

Re: Building an archtop of some sorts

Post by bender »

jvpp wrote:
robnobcorncob wrote:
jvpp wrote:
Anyone knows what the typical archtop board thickness is prior to starting carving?
1 inch according Bob Benedetto's "Making an Archtop Guitar" book.
Interesting, his tops look deceptively flat. I started with 20mm but have kept the pickup area flat all the way to the neck, hence the more pronounced horn arch.
I thought the usual thing was to taper the top from about the bridge or bridge pickup area. Are you going to carve out the back of the top (so that it's a more uniform thickness overall)?

Lostininverness
Gibson
Posts: 806
Joined: Mon Mar 16, 2015 11:11 am
Has liked: 499 times
Been liked: 136 times

Re: Building an archtop of some sorts

Post by Lostininverness »

Yeah, from what I've read you get your "neck plane" done at the angle to suit your bridge height, then to do the "pick up plane" from the end of the fret board to the bridge.

Looking good tho JVPP!

User avatar
AiRdAd
Vintage Post Junkie
Vintage Post Junkie
Posts: 7691
Joined: Sat Jul 04, 2009 2:33 pm
Has liked: 57 times
Been liked: 696 times

Re: Building an archtop of some sorts

Post by AiRdAd »

would this be suitable as a bridge? Seems cheap enough

http://www.trademe.co.nz/music-instrume ... 414196.htm
Slowy wrote: To Danny, everyone is either a supplier, customer or a courier.

User avatar
Jay
Vintage Post Junkie
Vintage Post Junkie
Posts: 7760
Joined: Sat Sep 25, 2010 9:35 pm
Has liked: 1630 times
Been liked: 1297 times

Re: Building an archtop of some sorts

Post by Jay »

bender wrote:
jvpp wrote:
robnobcorncob wrote:
1 inch according Bob Benedetto's "Making an Archtop Guitar" book.
Interesting, his tops look deceptively flat. I started with 20mm but have kept the pickup area flat all the way to the neck, hence the more pronounced horn arch.
I thought the usual thing was to taper the top from about the bridge or bridge pickup area. Are you going to carve out the back of the top (so that it's a more uniform thickness overall)?
Yes, the back will be carved out. Someone gave me some handy tools for it :D
Post by AiRdAd » Fri Nov 25, 2016 9:48 am
would this be suitable as a bridge? Seems cheap enough
Parts all sorted, bought the ABM bridge and Bigsby early this year.

Post by Lostininverness » Fri Nov 25, 2016 9:18 am
Yeah, from what I've read you get your "neck plane" done at the angle to suit your bridge height, then to do the "pick up plane" from the end of the fret board to the bridge.
I did the neck plane and the pickup plane angle is 0 degrees :D Doesn't matter for this build as I am telling myself it is a rehearsal for when I build one from the Redwood.

Reason for not planing the 'pickup area' is that I will be gluing the neck in with a longish tenon and will not use a dove tail as in 'proper' archtops.
When faced with quality, I recognise it every time.

User avatar
StrummersOfThunder
Vintage Post Junkie
Vintage Post Junkie
Posts: 7160
Joined: Sun Jul 15, 2012 2:23 pm
Has liked: 807 times
Been liked: 1294 times

Re: Building an archtop of some sorts

Post by StrummersOfThunder »

This is very exciting .

User avatar
Jay
Vintage Post Junkie
Vintage Post Junkie
Posts: 7760
Joined: Sat Sep 25, 2010 9:35 pm
Has liked: 1630 times
Been liked: 1297 times

Re: Building an archtop of some sorts

Post by Jay »

I can confirm BG's 'Flap Disc Carving' is marvellous and certainly speeds things up. I hate working with a blimmin grinder though. Still gives me the sh..ts.

After the flap disc agressive wood removal back to chisel and sandpaper. Here the result so far with 150 grid. I have gone for an 'unconventional' carve in that the carving rise happens fairly close to the edge. No need for acoustic resonance in this build.

I am also contemplating cutting off the neck bit at the pencil line shown in the 3rd photo. This would allow for better high neck access. Any reason why I shouldn't?

Flap Disc Carving result on the lower bout:

Image


Chisel and Sandpaper 150 grid result:

Image


Proposed guillotine cut shown by pencil line on neck bit: Should I or not?

Image
When faced with quality, I recognise it every time.

User avatar
jeremyb
Chorus of Organs
Posts: 40878
Joined: Sat Dec 06, 2008 9:03 am
Has liked: 7685 times
Been liked: 4157 times

Re: Building an archtop of some sorts

Post by jeremyb »

Looking awesome man!
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.

User avatar
bender
Darth Fader
Posts: 11838
Joined: Fri Feb 02, 2007 12:46 pm
Location: Dorkland
Has liked: 415 times
Been liked: 1010 times

Re: Building an archtop of some sorts

Post by bender »

Didn't want to use the thumb plane? That's exactly what they're for- and they allow for a much smoother transition from concave to convex. Also, a French curve cabinet scraper does a great job at achieving a lovely, uniform carve.

User avatar
Jay
Vintage Post Junkie
Vintage Post Junkie
Posts: 7760
Joined: Sat Sep 25, 2010 9:35 pm
Has liked: 1630 times
Been liked: 1297 times

Re: Building an archtop of some sorts

Post by Jay »

Yes, i have used both quite a bit on certain sections of the top... the scraper quickly removes the chisel dimples/uneveness and leaves a surface rady for sanding. Great tool!

The problem I have with the plane, even on the smallest blade protrusion, is that it cannot handle the sections on the top where the grain 'doesn't behave'. Great for sections where the grain is cooperating so to speak. Maybe it is because of the macrocarpa (it being a softwood) that makes using the thumb planer difficult. On this top I had much better control with a rasor sharp chisel which allowed my to take tiny cuts out in the grain induced difficult areas.

So to avoid having to carve for the next month or so, I decided to make the concave/convex transition narrow.

As the inside carving won't be that critical from a visual point of view, I intend to practice and use the planer a bit more as it is indeed a neat little tool.


Anyone any feedback on the neck question I asked?
When faced with quality, I recognise it every time.

User avatar
GrantB
ADMIN
Posts: 15843
Joined: Fri Oct 31, 2003 9:04 am
Location: Where I need to be
Has liked: 1353 times
Been liked: 2087 times

Re: Building an archtop of some sorts

Post by GrantB »

Cool stuff.

The neck pocket - how deep will it be? Or is that finished depth?
"Man is the most insane species. He worships an invisible god and destroys a visible nature. Unaware that this nature he's destroying is this god he's worshipping." - Hubert Reeves

User avatar
H671
Vintage Post Junkie
Vintage Post Junkie
Posts: 2316
Joined: Fri Jun 08, 2012 12:33 pm
Location: Auckland
Has liked: 73 times
Been liked: 264 times

Re: Building an archtop of some sorts

Post by H671 »

This might be a bit late, but you can buy a special carving disc to fit angle grinders. I can't remember where they are sold though.
Epiphone Riviera P93 & EJ200CE, Hagstrom Viking Bass, Doubleneck bass/guitar.
Rivera Clubster 45, Carvin AG100D, Ashton BSK158.

Post Reply