NZGuitars.com

Bg wrote: ↑Thu May 04, 2023 8:04 pmMate, you got 2 free!

Nah I actually got 4 spare… annoyingly had to buy 2 sets of 6…

Who knew about this feature in the gruv gear fret wraps?

jeremyb wrote: ↑Sat May 13, 2023 12:03 pm Who knew about this feature in the gruv gear fret wraps?

You should post that as a 'reel' complete with wagging finger and thumbs up.

Made this little shim for getting a ballpark position for setting pickup heights, although I find 2.5mm on the low side and 2.0mm on the high side when fretting the last fret generally pretty much perfect for me.

jeremyb wrote: ↑Thu Nov 16, 2023 11:14 am Made this little shim for getting a ballpark position for setting pickup heights, although I find 2.5mm on the low side and 2.0mm on the high side when fretting the last fret generally pretty much perfect for me.

Nice! I usually use a diy feeler gauge by stacking up picks of different thicknesses

Lyle wrote: ↑Thu Nov 16, 2023 12:40 pm

jeremyb wrote: ↑Thu Nov 16, 2023 11:14 am Made this little shim for getting a ballpark position for setting pickup heights, although I find 2.5mm on the low side and 2.0mm on the high side when fretting the last fret generally pretty much perfect for me.

Nice! I usually use a diy feeler gauge by stacking up picks of different thicknesses

HA! I have to admit I've done the same in the past, I have one of those little string height rulers but its a faff compared to just sticking a shim in!

Need to enlarge the pot holes in my 8 string, been putting it off cause I wasn't keen to try drill it out, this method looks way safer.

The correct way is to use a reamer, but for a one off, I’ve used a multitool burr and a washer

Bg wrote: ↑Thu Dec 28, 2023 7:22 am The correct way is to use a reamer, but for a one off, I’ve used a multitool burr and a washer

I almost pulled out my reamer, but figured since it cuts on an angle it would require filing anyway...

jeremyb wrote: ↑Thu Dec 28, 2023 10:18 am

Bg wrote: ↑Thu Dec 28, 2023 7:22 am The correct way is to use a reamer, but for a one off, I’ve used a multitool burr and a washer

I almost pulled out my reamer...

Careful with that.

jeremyb wrote: ↑Thu Dec 28, 2023 10:18 am

Bg wrote: ↑Thu Dec 28, 2023 7:22 am The correct way is to use a reamer, but for a one off, I’ve used a multitool burr and a washer

I almost pulled out my reamer, but figured since it cuts on an angle it would require filing anyway...

Much disappointed….

jeremyb wrote: ↑Sat May 13, 2023 12:03 pm Who knew about this feature in the gruv gear fret wraps?

What do those things do? I see them on djenty style guitars and still have no idea what they are.

kdawg2a wrote: ↑Thu Dec 28, 2023 1:23 pm

jeremyb wrote: ↑Sat May 13, 2023 12:03 pm Who knew about this feature in the gruv gear fret wraps?

What do those things do? I see them on djenty style guitars and still have no idea what they are.

They cut down the ringing behind the nut which comes through when you're doing staccato chugs with lots of pauses.

But, I've used hair scrunchies from the dollar shop for about 3 years and they work perfectly.

kdawg2a wrote: ↑Thu Dec 28, 2023 1:23 pm

jeremyb wrote: ↑Sat May 13, 2023 12:03 pm Who knew about this feature in the gruv gear fret wraps?

What do those things do? I see them on djenty style guitars and still have no idea what they are.

Bridge side of the nut you use them for tapping and sweeping to stop the other strings ringing and to make the notes of the ones you are tapping mute when you lift off

jeremyb wrote: ↑Thu Dec 28, 2023 2:21 pm

kdawg2a wrote: ↑Thu Dec 28, 2023 1:23 pm

jeremyb wrote: ↑Sat May 13, 2023 12:03 pm Who knew about this feature in the gruv gear fret wraps?

What do those things do? I see them on djenty style guitars and still have no idea what they are.

Bridge side of the nut you use them for tapping and sweeping to stop the other strings ringing and to make the notes of the ones you are tapping mute when you lift off

You're tapping and sweep picking now? That's some impressive stuff my bro. I can make a mediocre attempt at tapping but the sweeping thing is beyond me. Any tips/ insight?