Hi all
So i wouldnt mind trying to get some sound clips ect but with the unit not being able to run direct from USB to my pc
See attached photo of the rear
I have a USB interface see below
So what do i need to bridge the 2 to my PC
or whats the best method to capture to my pc without using a mic
Cheers
Oldie
Advice on recording from my Multiamp
Moderator: Capt. Black
- Olderama
- Vintage Post Junkie
- Posts: 7012
- meble-kuchenne.warszawa.pl
- Joined: Sun Dec 22, 2013 8:04 pm
- Has liked: 973 times
- Been liked: 876 times
- willow13
- Vintage Post Junkie
- Posts: 14558
- Joined: Sun Dec 19, 2004 2:36 pm
- Location: If less is more then just think how much more more is
- Has liked: 372 times
- Been liked: 634 times
Re: Advice on recording from my Multiamp
wouldn't you just run from the balanced DI into the mic pre amp?
If Less is More Then Just Think How Much More More would be
- bender
- Darth Fader
- Posts: 11856
- Joined: Fri Feb 02, 2007 12:46 pm
- Location: Dorkland
- Has liked: 416 times
- Been liked: 1016 times
Re: Advice on recording from my Multiamp
Connect the DI outs to the mic inputs if you have XLR (mic) cables, or the line outs to the line inputs using guitar cables or TRS jack cables. Either will be fine- just use whichever method you already have the right cables for.