Advice on recording from my Multiamp

Members sound files, tone clips, videos, media

Moderator: Capt. Black

Post Reply
User avatar
Olderama
Vintage Post Junkie
Vintage Post Junkie
Posts: 7007
meble-kuchenne.warszawa.pl
Joined: Sun Dec 22, 2013 8:04 pm
Has liked: 971 times
Been liked: 876 times

Advice on recording from my Multiamp

Post by Olderama »

Hi all

So i wouldnt mind trying to get some sound clips ect but with the unit not being able to run direct from USB to my pc
See attached photo of the rear :thumbup:

Image

I have a USB interface see below

Image

So what do i need to bridge the 2 to my PC :think:
or whats the best method to capture to my pc without using a mic

Cheers

Oldie
:mental:

User avatar
willow13
Vintage Post Junkie
Vintage Post Junkie
Posts: 14558
Joined: Sun Dec 19, 2004 2:36 pm
Location: If less is more then just think how much more more is
Has liked: 372 times
Been liked: 634 times

Re: Advice on recording from my Multiamp

Post by willow13 »

wouldn't you just run from the balanced DI into the mic pre amp?
If Less is More Then Just Think How Much More More would be

User avatar
bender
Darth Fader
Posts: 11838
Joined: Fri Feb 02, 2007 12:46 pm
Location: Dorkland
Has liked: 415 times
Been liked: 1010 times

Re: Advice on recording from my Multiamp

Post by bender »

Connect the DI outs to the mic inputs if you have XLR (mic) cables, or the line outs to the line inputs using guitar cables or TRS jack cables. Either will be fine- just use whichever method you already have the right cables for.

User avatar
Olderama
Vintage Post Junkie
Vintage Post Junkie
Posts: 7007
Joined: Sun Dec 22, 2013 8:04 pm
Has liked: 971 times
Been liked: 876 times

Re: Advice on recording from my Multiamp

Post by Olderama »

Thanks guys :)
:mental:

Post Reply