BG has done a stunning job on a new baffle for my Princeton that fits a 12” speaker, well enough that I want to make it the primary baffle.
I see you can get converting rings that you can use to convert the baffle to accomodate a smaller speaker size - anyone built or used one?
Or even better have one?
Anyone built a baffle converter?
Moderators: Slowy, Capt. Black
- TmcB
- I may have a problem
- Posts: 7782
- meble-kuchenne.warszawa.pl
- Joined: Fri Aug 22, 2008 12:17 pm
- Location: Kapiti
- Has liked: 682 times
- Been liked: 577 times
Anyone built a baffle converter?
Family Music Store - http://familymusic.co.nzGrantB wrote:Tony, your taste is, as always, very refined. Or as HG would say, "bloody awful".
- Slowy
- Vintage Post Junkie
- Posts: 23043
- Joined: Wed Sep 09, 2009 4:13 pm
- Location: Orcland
- Has liked: 1030 times
- Been liked: 2519 times
Re: Anyone built a baffle converter?
Use a smaller sheet of ply with the right size hole. Install tapered head bolts behind the baffle cloth, facing backwards. Locate these bolts through appropriately positioned holes in the baffle and secure with washers and wingnuts (having first removed the 12" speaker of course).
Or:
Extract speaker plug from its socket. Insert similar plug wired to an extension cab containing the desired speaker.
Play.
Or:
Extract speaker plug from its socket. Insert similar plug wired to an extension cab containing the desired speaker.
Play.
Beyond a critical point within a finite space, freedom diminishes as numbers increase. This is as true of humans as it is of gas molecules in a sealed flask. The human question is not how many can possibly survive within the system, but what kind of existence is possible for those who so survive.