Page 1 of 1

NAD and last guitar related purchase for a while

Posted: Mon Apr 02, 2018 5:44 pm
by stratkiwi
As some know I advertised on here for a secondhand head and cab but decided to go brand new and take what was available at the shop so I walked out with a marshall DSL100H head and blackstar HTV 212 Mk2 cabinet
MArshall.jpg
Hope I got it hooked up properly
amp back.jpg
cab back.jpg

Re: NAD and last guitar related purchase for a while

Posted: Mon Apr 02, 2018 5:52 pm
by willow13
if the bottom photo is the cab then yep is right

Re: NAD and last guitar related purchase for a while

Posted: Mon Apr 02, 2018 7:13 pm
by stratkiwi
willow13 wrote:if the bottom photo is the cab then yep is right
Bottom pic is definitely the cab and thanks heaps for confirming I had it all plugged in properly the laney cub head and jet city cab I had just over a year ago only had two sockets on each not four or five lol

Re: NAD and last guitar related purchase for a while

Posted: Mon Apr 02, 2018 7:16 pm
by Dharmajester
Yeah :silent:

Re: NAD and last guitar related purchase for a while

Posted: Mon Apr 02, 2018 7:56 pm
by willow13
stratkiwi wrote:
willow13 wrote:if the bottom photo is the cab then yep is right
Bottom pic is definitely the cab and thanks heaps for confirming I had it all plugged in properly the laney cub head and jet city cab I had just over a year ago only had two sockets on each not four or five lol
I mentioned on facebook to double check the ohms....if you have 2 16ohm speakers in the cab then I might be wrong. You would need to use the other outputs on the amp. A better photo of both might help (one that gets all the jacks in it)

Re: NAD and last guitar related purchase for a while

Posted: Mon Apr 02, 2018 8:44 pm
by stratkiwi
willow13 wrote:
stratkiwi wrote:
willow13 wrote:if the bottom photo is the cab then yep is right
Bottom pic is definitely the cab and thanks heaps for confirming I had it all plugged in properly the laney cub head and jet city cab I had just over a year ago only had two sockets on each not four or five lol
I mentioned on facebook to double check the ohms....if you have 2 16ohm speakers in the cab then I might be wrong. You would need to use the other outputs on the amp. A better photo of both might help (one that gets all the jacks in it)
Celestion seventy 80's are 8 ohm speakers like I was saying on FB I was only messing about it is going back to the 16 ohm mono output anyway, I did try a marshall 1932 closed back cab at the rockshop on it but it had way too much bottom end for playing in C tuning and the blackstar was much better and that one is an open back cab. as for a better pic of the outputs and inputs I had to crop the hell out of the pics on here so the forum would let me upload the pics

An excerpt from the online manual for the cabinet inputs
HTV-212 MkII Extension Cabinet
Power Rating (RMS): 160 Watts
Impedance: Stereo – 2 x 8 Ohms. Mono
– 4 or 16 Ohms. Selectable by input jack
Weight (kg): 21.9
Dimensions (mm): 709 x 550 x 278