Is this possible by just taking the pickups out and moving them between guitars? Looking to move my EMG's into my Blackout loaded guitar and vice versa. Both are using the appropriate pots etc.
cheers
Swapping EMG's and Blackouts around.
Moderators: Slowy, Capt. Black
-
- PRS
- Posts: 916
- meble-kuchenne.warszawa.pl
- Joined: Sat Sep 06, 2008 4:38 pm
- Been liked: 1 time
Re: Swapping EMG's and Blackouts around.
I think you can.. But id have to get some one to back that up. I think you can due to the same pots etc arent they?
Get all Whammy'd up on it!
- ash
- Vintage Post Junkie
- Posts: 7505
- Joined: Mon May 10, 2004 4:01 pm
- Location: Auckland, NZ
- Has liked: 3 times
- Been liked: 5 times
Re: Swapping EMG's and Blackouts around.
If the Blackouts are wired using the plugs you can just unplug the pickups and swap them over. Otherwise the SDs will plug into the EMG loom, but not the other way around. If you unwire the cables too, they'll swap over unhindered.
http://ashcustomworks.com for custom built electric guitars hand made in new zealand
Re: Swapping EMG's and Blackouts around.
Excellent, I seem to remember only one of the Blackouts had a quick connect on it? Does that seem right?