EMG 18V Mod on an LTD EC1000 Delux
Moderators: Slowy, Capt. Black
- wilsa
- Stagg
- Posts: 57
- meble-kuchenne.warszawa.pl
- Joined: Mon Aug 01, 2011 9:13 pm
Re: EMG 18V Mod on an LTD EC1000 Delux
Gave it ago but did not work out. I am pretty sure the batteries were set up correctly. Ammeter gave around 17V of current runnning through but then when plugged in to the guitar I would get no sound. 9V still works fine but could not get the 18V to work?
- jeremyb
- Chorus of Organs
- Posts: 41180
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7746 times
- Been liked: 4187 times
Re: EMG 18V Mod on an LTD EC1000 Delux
Are they rechargeables? if so they're only likely to be about 8.5 volts
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- jeremyb
- Chorus of Organs
- Posts: 41180
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7746 times
- Been liked: 4187 times
Re: EMG 18V Mod on an LTD EC1000 Delux
Actually looking at your wiring you've done it wrong, the red and black wires going into the guitar need to be swapped
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- sopachrga
- Vintage Post Junkie
- Posts: 3388
- Joined: Mon Oct 31, 2005 3:26 pm
- Location: Christchurch
- Has liked: 16 times
- Been liked: 59 times
Re: EMG 18V Mod on an LTD EC1000 Delux
Are you sure? The diagram you supplied has the coloring wrong for + and - at the first battery snap.
*edit*
Actually, colours are right.. but the symbols are wrong. So yeah that means you need to switch them as JB said.
*edit*
Actually, colours are right.. but the symbols are wrong. So yeah that means you need to switch them as JB said.
Ummm....
- jeremyb
- Chorus of Organs
- Posts: 41180
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7746 times
- Been liked: 4187 times
Re: EMG 18V Mod on an LTD EC1000 Delux
Symbols are right too It has to be reversed since you're clicking the two connectors togethersopachrga wrote:Are you sure? The diagram you supplied has the coloring wrong for + and - at the first battery snap.
*edit*
Actually, colours are right.. but the symbols are wrong. So yeah that means you need to switch them as JB said.
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- sopachrga
- Vintage Post Junkie
- Posts: 3388
- Joined: Mon Oct 31, 2005 3:26 pm
- Location: Christchurch
- Has liked: 16 times
- Been liked: 59 times
Re: EMG 18V Mod on an LTD EC1000 Delux
I guess. They are correct by implication. But not if you treat it as a stand alone unit.
If the battery snap has symbols stamped on it, they won't match.
Given that it is a sketch for 'paint by number' electricians, you'd expect it to show what the person will see.
It's not exactly an accurate schematic.
If the battery snap has symbols stamped on it, they won't match.
Given that it is a sketch for 'paint by number' electricians, you'd expect it to show what the person will see.
It's not exactly an accurate schematic.
Ummm....