how high the screws?

Talk about your Burstbuckers and Seymour Duncans....

Moderators: Slowy, Capt. Black

Post Reply
User avatar
dylan
Gibson
Posts: 627
meble-kuchenne.warszawa.pl
Joined: Sat Sep 02, 2006 8:24 pm
Location: Wanganui
Has liked: 39 times
Been liked: 25 times

how high the screws?

Post by dylan »

on an uncovered humbucker, how high above the plastic plate should the screw adjusters be before fine tweaking them?

does the lack of a metal cover mean they should poke up a bit?

thxor
:evil: Mids so haunting that demons took over my living room and now my guitar glows! :evil:

User avatar
Slowy
Vintage Post Junkie
Vintage Post Junkie
Posts: 22638
Joined: Wed Sep 09, 2009 4:13 pm
Location: Orcland
Has liked: 1011 times
Been liked: 2465 times

Re: how high the screws?

Post by Slowy »

I thought this thread was about drug use among prison guards.
Beyond a critical point within a finite space, freedom diminishes as numbers increase. This is as true of humans as it is of gas molecules in a sealed flask. The human question is not how many can possibly survive within the system, but what kind of existence is possible for those who so survive.

User avatar
Zaulkin
Vintage Post Junkie
Vintage Post Junkie
Posts: 5425
Joined: Thu Nov 27, 2008 4:01 pm
Has liked: 737 times
Been liked: 511 times

Re: how high the screws?

Post by Zaulkin »

dylan wrote:on an uncovered humbucker, how high above the plastic plate should the screw adjusters be before fine tweaking them?

does the lack of a metal cover mean they should poke up a bit?

thxor
I don't think the lack of a cover would change anything. If you needed the pickup to be higher for some reason you'd just adjust it with the pickup height screws anyway.

Post Reply