Amp Repair In Auckland - Suggestions

Discuss the stuff that makes your ears bleed.

Moderators: Slowy, Capt. Black

Post Reply
adrian0476
Ashton
Ashton
Posts: 203
meble-kuchenne.warszawa.pl
Joined: Mon Nov 03, 2008 12:58 pm

Amp Repair In Auckland - Suggestions

Post by adrian0476 »

Apparently Clarry doesn't live in Auckland anymore so I'm after someone to repair my wife's Fender Hotrod Deluxe that doesn't take 3 to 6 months of continually chasing up. The overdrive channel is almost silent. Suspected valves at first but have had these tested and they check out ok so more likely something on the PCB causing problems.
Not a fan

User avatar
jeremyb
Chorus of Organs
Posts: 43321
Joined: Sat Dec 06, 2008 9:03 am
Has liked: 8582 times
Been liked: 4450 times

Re: Amp Repair In Auckland - Suggestions

Post by jeremyb »

Alan from Anvil Amps is on here and knows his stuff :)

http://www.trademe.co.nz/services/trade ... 619456.htm
Standing on top of the world

User avatar
The Scarecrow
Dial Them Mids IN!
Posts: 4018
Joined: Tue Sep 09, 2003 3:40 pm
Has liked: 216 times
Been liked: 279 times

Re: Amp Repair In Auckland - Suggestions

Post by The Scarecrow »

adrian0476 wrote:Apparently Clarry doesn't live in Auckland anymore .
Is this a recent development, as I was at his place getting my Splawn retubed late last year.
http://www.facebook.com/#!/pages/The-Al ... 895?ref=ts

Trade Me: The_Scarecrow

"Friends don't let friends scoop mids."

User avatar
Anvil Amps Alan
Gibson
Posts: 803
Joined: Thu May 14, 2009 11:52 am
Location: Auckland (Howick)> Paeroa
Been liked: 89 times

Re: Amp Repair In Auckland - Suggestions

Post by Anvil Amps Alan »

I just spoke to Clarry about his rumoured exit from Auckland and he said (Quote) " tell them I will only be leaving here in a wooden box"
"Political correctness is a doctrine, fostered by a
delusional, illogical minority, and rabidly promoted by an
unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end"

User avatar
olegmcnoleg
Vintage Post Junkie
Vintage Post Junkie
Posts: 5771
Joined: Sat Dec 21, 2013 11:26 am
Location: Awkland
Has liked: 901 times
Been liked: 791 times

Re: Amp Repair In Auckland - Suggestions

Post by olegmcnoleg »

Anvil Amps Alan wrote:I just spoke to Clarry about his rumoured exit from Auckland and he said (Quote) " tell them I will only be leaving here in a wooden box"
He is planning to ship himself from auckland inside a speaker cabinet???

MakoGat
Squier
Posts: 317
Joined: Tue Feb 21, 2017 12:30 pm
Has liked: 49 times
Been liked: 115 times

Re: Amp Repair In Auckland - Suggestions

Post by MakoGat »

Could we have an update and contact details in this post for Auckland amp repairs? I have an old solid state with an issue of volume drops and difficulty getting it back up (pots have been cleaned out with electro clean with temporary results).

User avatar
The Scarecrow
Dial Them Mids IN!
Posts: 4018
Joined: Tue Sep 09, 2003 3:40 pm
Has liked: 216 times
Been liked: 279 times

Re: Amp Repair In Auckland - Suggestions

Post by The Scarecrow »

MakoGat wrote:Could we have an update and contact details in this post for Auckland amp repairs? I have an old solid state with an issue of volume drops and difficulty getting it back up (pots have been cleaned out with electro clean with temporary results).
Clarry doesn't work on solid-state from memory.

This is a bloke called Keith Prictor on the North Shore (Bayview) who used to service amps a few years back, not sure if still doing it.
http://www.facebook.com/#!/pages/The-Al ... 895?ref=ts

Trade Me: The_Scarecrow

"Friends don't let friends scoop mids."

User avatar
JHorner
Vintage Post Junkie
Vintage Post Junkie
Posts: 3169
Joined: Wed Nov 12, 2014 5:45 pm
Location: Auckland
Has liked: 395 times
Been liked: 489 times

Re: Amp Repair In Auckland - Suggestions

Post by JHorner »

The Scarecrow wrote:
MakoGat wrote:Could we have an update and contact details in this post for Auckland amp repairs? I have an old solid state with an issue of volume drops and difficulty getting it back up (pots have been cleaned out with electro clean with temporary results).
Clarry doesn't work on solid-state from memory.

This is a bloke called Keith Prictor on the North Shore (Bayview) who used to service amps a few years back, not sure if still doing it.
Yeah Clarry declined to look at my bass players Jansen Crusader SS amp.

Took it to Jansen, but they don't actually touch it, they just send it to an amp tech whose identity they keep to themselves. Which means you get no direct communication with the tech and your bill is whatever it is.

User avatar
H671
Vintage Post Junkie
Vintage Post Junkie
Posts: 2373
Joined: Fri Jun 08, 2012 12:33 pm
Location: Auckland
Has liked: 78 times
Been liked: 273 times

Re: Amp Repair In Auckland - Suggestions

Post by H671 »

JHorner wrote:
The Scarecrow wrote:
MakoGat wrote:Could we have an update and contact details in this post for Auckland amp repairs? I have an old solid state with an issue of volume drops and difficulty getting it back up (pots have been cleaned out with electro clean with temporary results).
Clarry doesn't work on solid-state from memory.

This is a bloke called Keith Prictor on the North Shore (Bayview) who used to service amps a few years back, not sure if still doing it.
Yeah Clarry declined to look at my bass players Jansen Crusader SS amp.

Took it to Jansen, but they don't actually touch it, they just send it to an amp tech whose identity they keep to themselves. Which means you get no direct communication with the tech and your bill is whatever it is.
Their amp tech was John Veldwijk, he has now retired & only does repairs if he feels like it.
Epiphone Riviera P93 & EJ200CE, Hagstrom Viking Bass, Doubleneck bass/guitar.
Rivera Clubster 45, Carvin AG100D, Ashton BSK158.

MakoGat
Squier
Posts: 317
Joined: Tue Feb 21, 2017 12:30 pm
Has liked: 49 times
Been liked: 115 times

Re: Amp Repair In Auckland - Suggestions

Post by MakoGat »

Ive been advised to take it to Livesound in Ponsonby http://www.livesound.co.nz/

mrmofo
Vintage Post Junkie
Vintage Post Junkie
Posts: 2353
Joined: Fri Jun 05, 2015 8:39 am
Has liked: 364 times
Been liked: 135 times

Re: Amp Repair In Auckland - Suggestions

Post by mrmofo »

another vote for Alan Anvil Amps. he fixed my old Australian made Eminar a few years ago and its still rocking along 100%
There are still some that think the neck PU is moved to accommodate the extra frets which only proves they cannot detect the difference in length of each.

User avatar
Spykerwolf
Fender
Fender
Posts: 504
Joined: Mon May 03, 2010 1:33 pm
Location: Auckland
Has liked: 25 times
Been liked: 15 times

Re: Amp Repair In Auckland - Suggestions

Post by Spykerwolf »

Any repair guys on the shore? Bumping this instead of creating a new thread.

Post Reply