NPD x2
Moderators: Slowy, Capt. Black
-
- Gibson
- Posts: 731
- meble-kuchenne.warszawa.pl
- Joined: Sat Nov 27, 2004 1:01 pm
- Location: Auckland
- Has liked: 144 times
- Been liked: 273 times
NPD x2
CXM and Harmonious Monk came in the post today and my goodness are there some incredible sounding pedals being made these days, I can just get lost for hours.
-
- Gibson
- Posts: 731
- Joined: Sat Nov 27, 2004 1:01 pm
- Location: Auckland
- Has liked: 144 times
- Been liked: 273 times
Re: NPD x2
The Harmonious Monk is going on my small board and the CXM on the big board under the hatch controlled by the G3 using midi. I've always used the Provibe on the Captain Coconut for my Tremolo sounds and vice versa but my initial impression is the Hamonious Monk might be a bit more versatile. Now I need to stop buying pedals so I can get myself a sweet vintage Les Paul .
- MattAnt
- Vintage Post Junkie
- Posts: 1388
- Joined: Sun May 20, 2012 2:31 pm
- Has liked: 10 times
- Been liked: 113 times
Re: NPD x2
Maaaate you got the cxm on trademe? Nice.
You should put the cxm on top, you might find yourself twiddling those faders a bit, plus it looks badass!
You should put the cxm on top, you might find yourself twiddling those faders a bit, plus it looks badass!
Scarecrow101 on TradeMe
- JoeBlow
- Gibson
- Posts: 832
- Joined: Tue Sep 14, 2021 11:20 am
- Has liked: 339 times
- Been liked: 218 times
Re: NPD x2
You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
- Slowy
- Vintage Post Junkie
- Posts: 22975
- Joined: Wed Sep 09, 2009 4:13 pm
- Location: Orcland
- Has liked: 1026 times
- Been liked: 2513 times
Re: NPD x2
You've rapidly shown yourself to be a new found brother so I'll offer you some advice:JoeBlow wrote: ↑Thu Sep 16, 2021 9:40 pm You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
"Sorry to go off topic"
If we didn't go off topic in threads, we wouldn't have a clue where we were.
It's a stream of consciousness thing........
And welcome!
Beyond a critical point within a finite space, freedom diminishes as numbers increase. This is as true of humans as it is of gas molecules in a sealed flask. The human question is not how many can possibly survive within the system, but what kind of existence is possible for those who so survive.
-
- Vintage Post Junkie
- Posts: 20783
- Joined: Wed Sep 07, 2005 12:08 pm
- Location: Wellington, NZ
- Has liked: 644 times
- Been liked: 810 times
Re: NPD x2
It's true, I'm surprised the feet and toes thread hasn't swung around to hats yet...Slowy wrote: ↑Thu Sep 16, 2021 9:49 pmYou've rapidly shown yourself to be a new found brother so I'll offer you some advice:JoeBlow wrote: ↑Thu Sep 16, 2021 9:40 pm You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
"Sorry to go off topic"
If we didn't go off topic in threads, we wouldn't have a clue where we were.
It's a stream of consciousness thing........
And welcome!
Aquila Rosso wrote:I don't a mind an iced tea rimjob one little bit
Molly wrote:Trousers are no substitute for talent
druz wrote:I present to you, the whogivesafuckocaster
- JoeBlow
- Gibson
- Posts: 832
- Joined: Tue Sep 14, 2021 11:20 am
- Has liked: 339 times
- Been liked: 218 times
Re: NPD x2
Thank you . I was going to wait a bit, so I wouldn't derail the praise for the awesome pedals early on in the piece.Slowy wrote: ↑Thu Sep 16, 2021 9:49 pmYou've rapidly shown yourself to be a new found brother so I'll offer you some advice:JoeBlow wrote: ↑Thu Sep 16, 2021 9:40 pm You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
"Sorry to go off topic"
If we didn't go off topic in threads, we wouldn't have a clue where we were.
It's a stream of consciousness thing........
And welcome!
Chase Bliss pedals are amazing. Look at that big retro looking thing. I like how they collaborate with other companies regularly, in order to make the best pedal possible. It's also good to see the head guy not shy away from presenting his creations at trade shows, etc, with having a stutter. No need to.
-
- Gibson
- Posts: 731
- Joined: Sat Nov 27, 2004 1:01 pm
- Location: Auckland
- Has liked: 144 times
- Been liked: 273 times
Re: NPD x2
You could do that if the amp had multiple inputs for different channels like vintage Fender, Marshalls, Vox. I'm running two amps, you can send overdrive to both amps then send the tremolo and delay in parallel to one of the amps then send the reverb in both amps in stereo at the end or something else that sounds great is send the effects 100% wet to a clean amp and run the other amp dirty.JoeBlow wrote: ↑Thu Sep 16, 2021 9:40 pm You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
- Slowy
- Vintage Post Junkie
- Posts: 22975
- Joined: Wed Sep 09, 2009 4:13 pm
- Location: Orcland
- Has liked: 1026 times
- Been liked: 2513 times
Re: NPD x2
Do you play in a band? I ask because I tried using a stereo rig. It sounded great on its own but was more trouble than it was worth live.Voxshall wrote: ↑Fri Sep 17, 2021 12:32 amYou could do that if the amp had multiple inputs for different channels like vintage Fender, Marshalls, Vox. I'm running two amps, you can send overdrive to both amps then send the tremolo and delay in parallel to one of the amps then send the reverb in both amps in stereo at the end or something else that sounds great is send the effects 100% wet to a clean amp and run the other amp dirty.JoeBlow wrote: ↑Thu Sep 16, 2021 9:40 pm You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
Beyond a critical point within a finite space, freedom diminishes as numbers increase. This is as true of humans as it is of gas molecules in a sealed flask. The human question is not how many can possibly survive within the system, but what kind of existence is possible for those who so survive.
- jeremyb
- Chorus of Organs
- Posts: 41496
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7840 times
- Been liked: 4229 times
Re: NPD x2
You can’t hide the cxm away!!
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
-
- Gibson
- Posts: 731
- Joined: Sat Nov 27, 2004 1:01 pm
- Location: Auckland
- Has liked: 144 times
- Been liked: 273 times
Re: NPD x2
I do play in a band, what was the trouble you had?Slowy wrote: ↑Fri Sep 17, 2021 8:51 amDo you play in a band? I ask because I tried using a stereo rig. It sounded great on its own but was more trouble than it was worth live.Voxshall wrote: ↑Fri Sep 17, 2021 12:32 amYou could do that if the amp had multiple inputs for different channels like vintage Fender, Marshalls, Vox. I'm running two amps, you can send overdrive to both amps then send the tremolo and delay in parallel to one of the amps then send the reverb in both amps in stereo at the end or something else that sounds great is send the effects 100% wet to a clean amp and run the other amp dirty.JoeBlow wrote: ↑Thu Sep 16, 2021 9:40 pm You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?
- Slowy
- Vintage Post Junkie
- Posts: 22975
- Joined: Wed Sep 09, 2009 4:13 pm
- Location: Orcland
- Has liked: 1026 times
- Been liked: 2513 times
Re: NPD x2
Biggest problem was with modulation and delay. The slightest variation of timing and it was a trainwreck.Voxshall wrote: ↑Fri Sep 17, 2021 11:10 amI do play in a band, what was the trouble you had?Slowy wrote: ↑Fri Sep 17, 2021 8:51 amDo you play in a band? I ask because I tried using a stereo rig. It sounded great on its own but was more trouble than it was worth live.Voxshall wrote: ↑Fri Sep 17, 2021 12:32 am
You could do that if the amp had multiple inputs for different channels like vintage Fender, Marshalls, Vox. I'm running two amps, you can send overdrive to both amps then send the tremolo and delay in parallel to one of the amps then send the reverb in both amps in stereo at the end or something else that sounds great is send the effects 100% wet to a clean amp and run the other amp dirty.
Then there's all the extra stuff to carry.
Fact is, with talent as teeny as mine, it's best to keep things very sinple.
Are you the only guitar in your band? That would help.
Beyond a critical point within a finite space, freedom diminishes as numbers increase. This is as true of humans as it is of gas molecules in a sealed flask. The human question is not how many can possibly survive within the system, but what kind of existence is possible for those who so survive.
-
- Gibson
- Posts: 731
- Joined: Sat Nov 27, 2004 1:01 pm
- Location: Auckland
- Has liked: 144 times
- Been liked: 273 times
Re: NPD x2
I hear you it would look cool watching the faders change position, but with the lift up lid on the board it's easy to change settings and create presets. I spent 3 months on Pedal playground trying to optimise space to get the most pedals in a smaller width board and having the CXM up top would create to much wasted space around the tuner, I also needed to fit two amps and the pedalboard on a small collapsible trolly, so with a guitar strapped on my back I can take the entire setup in one trip, so definitely don't want to go any bigger on the board size.
- rickenbackerkid
- Vintage Post Junkie
- Posts: 6741
- Joined: Thu Apr 28, 2005 1:52 pm
- Has liked: 210 times
- Been liked: 663 times
Re: NPD x2
Yes, absolutely.JoeBlow wrote: ↑Thu Sep 16, 2021 9:40 pm You've got great pedals there.
Sorry to go off topic, but with the G3, can you assign a particular pedal to be activated with the clean channel of your amp? Say you were on the dirty channel, and wanted to go to your clean with your camouflage at the same time?