[jvpp]

Tayda will carry them cheapish.

Indeed, $0.59 for one, $1 for shipping??? , $5 minimum order. That shipping can't be right? Right?

Will get one at Jaycar tomorrow, not ideal, but good enough for testing unit.

[sizzlingbadger]

Once you have verified it’s the pot it might be worth contacting Catalinbread, they may chuck one in the post.

[jvpp]

Once you have verified it’s the pot it might be worth contacting Catalinbread, they may chuck one in the post.

Pot was stuffed and a couple of other things. Put a new (Jaycar) pot in this morning and to my uninitiated ears it all works fine now. Very high tremolo frequencies sound scruffy, but I don't think anyone would use that anyway and the youtube videos seem to indicate the same.

The compressor is also fixed, again mechanical failure. Put a new footswitch in from Jaycar, expensive little things.

Slowy, all good for pickup mate

[sizzlingbadger]

Thats sounds normal form memory of owning one, higher voltage supply helps.

[jvpp]

thanks, and yes, i only have a 9V supply so that doesn't help.

[Cdog]

Tayda will carry them cheapish.

Indeed, $0.59 for one, $1 for shipping??? , $5 minimum order. That shipping can't be right? Right?

Will get one at Jaycar tomorrow, not ideal, but good enough for testing unit.

Tayda are great for pedal builds. I use them for pots, enclosures and film caps mainly. Their jacks and switches are pretty shonky however.

[Slowy]

Once you have verified it’s the pot it might be worth contacting Catalinbread, they may chuck one in the post.

Pot was stuffed and a couple of other things. Put a new (Jaycar) pot in this morning and to my uninitiated ears it all works fine now. Very high tremolo frequencies sound scruffy, but I don't think anyone would use that anyway and the youtube videos seem to indicate the same.

The compressor is also fixed, again mechanical failure. Put a new footswitch in from Jaycar, expensive little things.

Slowy, all good for pickup mate

That's amazing. I was charged $85 by y'all -know-who to absolutely not fix the Semaphore.
So now there's a Wampler EGO and a Keeley Compressor Plus...... Anybody want a shootout?

[jvpp]

The semaphore was quite tricky to fix... as there were a couple of faults working in tandem so to speak. The shape potentiometer had a hair crack on the copper leading to the carbon deposit and appeared as open circuit to, ahum, the circuit. Tried to solder it but no luck so new pot went in. The tremolo's other erratic behaviour suggested a faulty capacitor but not sure which one. So I resoldered all the capacitor connections and that appeared to do the trick. What did he do for $85? It took me 30 minutes to figure out what was wrong, 15 minutes to try to repair the pot and then when I had bought the new pot another half hour or so to repair.

Finding the compressor's fault was an exercise in perseverance. Once I figured out it was the switch I managed to find an exact match for the compressor footswitch at Jaycar.

I would't mind trying/comparing the Keeley please

I wonder if DC's unit is suffering from the same cap issues. Tis made in China and I must say it was not assembled very well, but that may have been done by the "y'all -know-who"

[jvpp]

Weird, my Semaphore is sick too. It has a slight wobble and very low output

I suppose I can have a look at yours too while I am at it...

[Slowy]

What did he do for $85? It took me 30 minutes to figure out what was wrong, 15 minutes to try to repair the pot and then when I had bought the new pot another half hour or so to repair.

He didn't do a damn thing.

......Tis made in China and I must say it was not assembled very well....

Disappointing considering it was a premium price product.

[jvpp]

When I opened it, I could see someone had been in there before.... probably assembled nicely in China and not after who ever opened it subsequently?

[Single coil]

Who’s the dodgy $85 bloke? I’m not gettin any richer so it can’t be me

[Slowy]

Just picked these up from the talented and totally excellent Mr. jvpp.

THEY LIVE!!!!!!!!!

Thank you my friend. Both are too good to abandon and it's great to have them back!

But now I have a problem: I have a Semaphore, a Strymon Flint and a Mr Black Deluxe Plus. This is two more wobble boxes than a man needs. I will keep the Strymon. Anybody interested in a swap for one of the others?

Don't want OD/distortion pedals. DO want Muff type fuzz. Smooth fuzz is the key. I've done the fat, the spitty and the apocalyptic and they're not me. (I'm just too old according to my son)
Will also consider anything that's not reverb (got plenty).

Interested? The Semaphore is seriously versatile wobble and the Mr Black is the effects section of a Blackface Fender.

[Conway]

Check out the One Control I have in my pedals for trade thread. It was on my board the day of our 9 hour jam session. Smooth muff fuzz indeed.