NZGuitars.com : Filling you with GAS since 2003

Good luck figuring that out, I’ve thought about it before too as the D Drive pedal I make os based on it. I know Love pedal bought the rights to build the official ones so guessing there must be a premium for a pre love pedal version but it looks like there’s Red dot, V1, V2 etc. Good luck!

After some experimenting I did find a work around, required taking my Volante out of the HX Stomp loop and then plugging a Bluetooth adapter into the fx loop therefore being able to shift it to after all fx in the Chain. Seemed to work well, I cant understand why using the same Bluetooth adapter com...

Hang on a sec, you've got a HX Stomp eh? why not use that? unless you're using both inputs you could put a bluetooth audio receiver on one input and it has headphone out :-) Tried that but it’s a mushy phasey mess, I think I’d need to mix them separately at the outputs as apposed to blending it all...

Maybe the Roland Go Mixer? I was tempted by the pro one a while ago, I think the audio is USB cable only though... if I do it now I either use my Spark or just a bluetooth speaker, or direct into my interface with a plugin. Hadn’t seen that one, although really hoping for Bluetooth without special ...

Trying to find the right solution to jamming along to YouTube etc. Currently I have a Vox Adio Air GT for this purpose which is ok but I’d rather have a mini 2 ch mixer with Bluetooth fitted under my board somewhere which can mix in phone audio via Bluetooth and the pedalboard with a level for each ...

30 or more! Only 8-10 on my board at a given time though.
The rest just sit on the shelf for me to admire and play occasionally.

Welcome, no idea on how to find a good LPC here in NZ though. but I’m sure there will be some around. 90s is a good place to start with quality of woods and general build but I wouldn’t narrow my search to just that, plenty of good ones from different eras. Isnt Dhamajester selling an LPC currently?...

Finally finished the Tolex on a 2x12 I built a while ago, unfortunately my finishing skills are still a bit off, might have to re glue the back oval. Designed it to fit a standard size Marshall head, it sounds big! Like it seems to have more low end kick than my 4x12, although I suspect if I swapped...

Would love an honest review when you have had a good play! Haven't had a good play yet. But had a solid introduction just before Xmas. :) First impressions: Sounds and plays nothing like my actual Super Bass. Second impressions: Tweak the settings and the cab model to match the ones I use in real l...

jeremyb wrote: ↑Sun Dec 24, 2023 1:46 pm Current state of the board, haven’t even tested a bunch of them…

I’d pay you to setup and do cable management on my board but Im likely to swap out a pedal a week later, nice job on your board though, tidy as!
SSS pedal, is a clone of Vertex Steel String Singer?

Haven't come across the Blues Power before, whats it based on? whats the second footswitch for? I think it might actually be a modded TS, but sounds quite different in reality. It’s my always on glassy pushed clean sound. I originally added the second foot switch to select between 2 master volumes ...

Had a bit of an update recently. Been going between using a real amp with a load box and IRs or going direct with the HX Stomp depending on convenience. Everything except the HX Stomp and Volante are going into the the patch bay so I can easily swap between real amp or HX if a cable goes down (which...

I’ve got one but it’s the newer version with mostly smd size components, opened it up to have a look at modding, saw the tiny components and closed it back up again. What does yours have? Mines the same, chinese made SMD, was thinking replacing the whole board, will likely do the true bypass and LE...

I’ve got one but it’s the newer version with mostly smd size components, opened it up to have a look at modding, saw the tiny components and closed it back up again. What does yours have?

I’m still waiting for the post where you picked up
A 50s LP Junior with a repaired neck for $300 or something similar.
Hows Craigslist finds in your area?