NZGuitars.com : Filling you with GAS since 2003

I have one of these: https://www.musicworks.co.nz/jim-dunlop-mxr-m303-clone-looper-guitar-effects-pedal-epmm303 You can spend $100 on a used Ditto and have 90% of the bases covered, just if you need longer looping time, speed and reverse options. There are aspects like bit rate that get cited on da...

I have one of these: https://www.musicworks.co.nz/jim-dunlop-mxr-m303-clone-looper-guitar-effects-pedal-epmm303 You can spend $100 on a used Ditto and have 90% of the bases covered, just if you need longer looping time, speed and reverse options. There are aspects like bit rate that get cited on dat...

Does that say Sebbdogg?

I've been using a Morley Maverick for years. Smaller than a crybaby and switchless too.

I've been playing a bit of Elden Ring recently, so this gets me a lil moist. Th row it to the streets... I measn forum to pass around and review :P Since I'm considering an artwork change (making the "overdrive" text bigger) I wouldn't be against sending it out, but on the other hand this...

https://i.imgur.com/U1pwbKX.jpeg I've been designing this medium gain soft clipper on and off for about a year. Despite it being gold and horsey it's nothing like a Klon but is a medium gain blues machine that absolutely loves the neck pickup of a strat, Comp switch up, Size switch up, and dollops ...

It'd be easier to mask off all but the binding, spray it black, remove the tape, clean up the lines, the spray a couple of coats of clear.

Replacing pots and frets seem like maintenance issues more than modding.

Does it count as in the mail if I picked it up myself on a 7 hour round trip to Tauranga and back? Got a 1988 Marshall 1960a with the white label T75s (my favourite speaker). It's beat to hell so you know it's good, and the car smells like a damp garage now, so you know it's doubly good. 80% of the ...

Any point of contact can cause slippage, on the LP that's bridge saddles, nut slots, and to a lesser extent the tuners themmselves. Its worth it on a older guitar to remove any burrs that exist in the slots at either end. Fold over a piece of 400 grit sandpaper and rub it in the slots until theres ...

Any point of contact can cause slippage, on the LP that's bridge saddles, nut slots, and to a lesser extent the tuners themmselves. Its worth it on a older guitar to remove any burrs that exist in the slots at either end. Fold over a piece of 400 grit sandpaper and rub it in the slots until theres n...

Interesting thing is on the way. A Hohner L59, which is also a Cort GE27, which is also a lot of other things. Mid 80s Korean Les Paul style thing made by Cortek but badged with whoever paid for a big enough order. The one I have on the way was badged as Canora, which seems to have been ordered by a...

If you're doing an order from Evatco let me know and I'll get involved to save on shipping. Cheers, but the 0.68uF/680n part they have is on backorder. I follow a couple of Aussie amp tech and modding channels and they have a lot more stuff over there, but still plenty of the hassles we do. That wa...

If you've never delved into parallel/series wiring on a HB equipped guitar rather than full/split, you are missing out.

If you're doing an order from Evatco let me know and I'll get involved to save on shipping.