Page 2 of 2
Re: Fender Decals
Posted: Thu Feb 23, 2023 7:27 pm
by clubhouse
jeremyb wrote: ↑Thu Feb 23, 2023 7:05 pm
You can buy waterslide paper and make your own on an inkjet printer, just spray clear coat over it and let it dry before wetting so it doesn't run...
I'll steal this to make 'Running in Procedure' decals for my scooter restos. Thanks, man
Re: Fender Decals
Posted: Thu Feb 23, 2023 10:02 pm
by robthemac
Starfire wrote: ↑Thu Feb 23, 2023 7:24 pm
jeremyb wrote: ↑Thu Feb 23, 2023 7:05 pm
You can buy waterslide paper and make your own on an inkjet printer, just spray clear coat over it and let it dry before wetting so it doesn't run...
Yes, but it won't have metallic ink like a Fender decal.
I thought about buying the paper, then seeing if a print shop could do the metallic ink.
Re: Fender Decals
Posted: Fri Feb 24, 2023 7:56 am
by smallface
robthemac wrote: ↑Thu Feb 23, 2023 6:09 pm
Can I have the fucked misspelled decal please.
Absolutely.
- 20230223_183630.jpg (1.42 MiB) Viewed 1992 times
Re: Fender Decals
Posted: Fri Feb 24, 2023 8:17 am
by MikeC
I reckon you could fix that with a sharp knife but it would be a prick of a job.
Re: Fender Decals
Posted: Fri Feb 24, 2023 8:28 am
by robthemac
smallface wrote: ↑Fri Feb 24, 2023 7:56 am
robthemac wrote: ↑Thu Feb 23, 2023 6:09 pm
Can I have the fucked misspelled decal please.
Absolutely.
20230223_183630.jpg
Ta. DM me your Ts and Cs.
Re: Fender Decals
Posted: Fri Feb 24, 2023 8:34 am
by GrantB
MikeC wrote: ↑Fri Feb 24, 2023 8:17 am
I reckon you could fix that with a sharp knife but it would be a prick of a job.
Agreed - it's a snip, removing that whole line, removing the offending H, join back up.
The rest of the accuracy is a little dicey though...those swirls are too thick, font wrong etc. Tone is in the font.
Re: Fender Decals
Posted: Fri Feb 24, 2023 8:42 am
by robthemac
Don't worry, I have nothing but nefarious intentions for it.
Re: Fender Decals
Posted: Fri Feb 24, 2023 5:11 pm
by smallface
GrantB wrote: ↑Fri Feb 24, 2023 8:34 am
MikeC wrote: ↑Fri Feb 24, 2023 8:17 am
I reckon you could fix that with a sharp knife but it would be a prick of a job.
Agreed - it's a snip, removing that whole line, removing the offending H, join back up.
The rest of the accuracy is a little dicey though...those swirls are too thick, font wrong etc. Tone is in the font.
Any recommendations for a good decal supplier?
Re: Fender Decals
Posted: Fri Feb 24, 2023 5:31 pm
by Starfire
Re: Fender Decals
Posted: Fri Feb 24, 2023 6:35 pm
by smallface
Perfect! Thanks