Fair enough. For US$1 from PedalPCB, it is hard to complain. I assume they are the fairly standard ground the input to the effect in bypass mode style of true bypass? I never actually checked.chur wrote: ↑Thu Jan 13, 2022 10:56 am I have done it using solder wick and it wasn't too bad. I usually have a few spare boards, so probably wouldn't bother most of the time unless desperate.
Funny you mention the ribbon, I'm up to about the 12th build now over the last few years, and each time I say the same thing... and then never buy any
Pedal Building Resources
Moderators: Slowy, Capt. Black
- FuzzMonkey
- Gibson
- Posts: 623
- meble-kuchenne.warszawa.pl
- Joined: Fri Nov 06, 2020 7:25 pm
- Has liked: 518 times
- Been liked: 412 times
Re: Pedal Building Resources
- jeremyb
- Chorus of Organs
- Posts: 41471
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7837 times
- Been liked: 4227 times
Re: Pedal Building Resources
3D printed drilling guides! https://www.keechdesign.com/
I should design some, looks like good money to be made
I should design some, looks like good money to be made
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- FuzzMonkey
- Gibson
- Posts: 623
- Joined: Fri Nov 06, 2020 7:25 pm
- Has liked: 518 times
- Been liked: 412 times
Re: Pedal Building Resources
You should. You could called them 'JB's Jigs'.jeremyb wrote: ↑Tue Apr 04, 2023 11:02 am 3D printed drilling guides! https://www.keechdesign.com/
I should design some, looks like good money to be made
- jeremyb
- Chorus of Organs
- Posts: 41471
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7837 times
- Been liked: 4227 times
Re: Pedal Building Resources
Like Pauline’s pens, only available at a local shop for local people!!!FuzzMonkey wrote: ↑Tue Apr 04, 2023 7:31 pmYou should. You could called them 'JB's Jigs'.jeremyb wrote: ↑Tue Apr 04, 2023 11:02 am 3D printed drilling guides! https://www.keechdesign.com/
I should design some, looks like good money to be made
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- TmcB
- I may have a problem
- Posts: 7764
- Joined: Fri Aug 22, 2008 12:17 pm
- Location: Kapiti
- Has liked: 675 times
- Been liked: 574 times
Re: Pedal Building Resources
Got a new soldering iron recommendation- Ksger T12
https://a.aliexpress.com/_mLB7286
Heats in 2 seconds, is tiny and cheap.
Tony Pepers recommended it, arrived in 6 days, and it’s superb.
$70ish can’t be beat.
https://a.aliexpress.com/_mLB7286
Heats in 2 seconds, is tiny and cheap.
Tony Pepers recommended it, arrived in 6 days, and it’s superb.
$70ish can’t be beat.
Family Music Store - http://familymusic.co.nzGrantB wrote:Tony, your taste is, as always, very refined. Or as HG would say, "bloody awful".
- FuzzMonkey
- Gibson
- Posts: 623
- Joined: Fri Nov 06, 2020 7:25 pm
- Has liked: 518 times
- Been liked: 412 times
Re: Pedal Building Resources
I was looking at something similar before being gifted a Goot RX711AS soldering station.TmcB wrote: ↑Sat Feb 03, 2024 1:18 pm Got a new soldering iron recommendation- Ksger T12
https://a.aliexpress.com/_mLB7286
Heats in 2 seconds, is tiny and cheap.
Tony Pepers recommended it, arrived in 6 days, and it’s superb.
$70ish can’t be beat.