Soldering Iron recommendations
Moderators: Slowy, Capt. Black
-
- Stagg
- Posts: 27
- meble-kuchenne.warszawa.pl
- Joined: Mon Mar 17, 2014 1:21 pm
Soldering Iron recommendations
Anyone have a decent, mid-priced ($50-$100) soldering iron recommendation?
I have one of the Goot pencil-style ones from Surplustronics but I seem to have a terrible time with it (as opposed to the irons I've used at AUT Maker Lab)
A station set-up would be preferable, I've seen mentions of the Weller WC100 but can't seem to track them down for sale in NZ.
Thanks
I have one of the Goot pencil-style ones from Surplustronics but I seem to have a terrible time with it (as opposed to the irons I've used at AUT Maker Lab)
A station set-up would be preferable, I've seen mentions of the Weller WC100 but can't seem to track them down for sale in NZ.
Thanks
- TmcB
- I may have a problem
- Posts: 7742
- Joined: Fri Aug 22, 2008 12:17 pm
- Location: Kapiti
- Has liked: 661 times
- Been liked: 566 times
Re: Soldering Iron recommendations
There's pretty much nothing in that range
The closest I've found is the Duratech station at Jaycar but that's still $120ish
The closest I've found is the Duratech station at Jaycar but that's still $120ish
Family Music Store - http://familymusic.co.nzGrantB wrote:Tony, your taste is, as always, very refined. Or as HG would say, "bloody awful".
- Vince
- Vintage Post Junkie
- Posts: 7463
- Joined: Tue Nov 11, 2008 11:31 pm
- Location: Upper Hutt The Brave
- Has liked: 389 times
- Been liked: 186 times
- Contact:
Re: Soldering Iron recommendations
There's a thread on it here but I've not looked inside.
http://nzguitars.com/forum/viewtopic.php?f=42&t=29873
http://nzguitars.com/forum/viewtopic.php?f=42&t=29873
"Vince, have you ever tried playing an expensive bass?" - Polarbear.
"And isn't that the finest acoustic bass guitar feedback solo you've ever heard?" - Billy Moose.
My Bandcamp Page
Facebook
"And isn't that the finest acoustic bass guitar feedback solo you've ever heard?" - Billy Moose.
My Bandcamp Page
- GrantB
- ADMIN
- Posts: 15932
- Joined: Fri Oct 31, 2003 9:04 am
- Location: Where I need to be
- Has liked: 1364 times
- Been liked: 2100 times
Re: Soldering Iron recommendations
Not wanting to hijack your thread OP, but can anyone tell if it is OK to grind a new sharp point on my big mofo of a soldering iron (the one I use to do grounding for pots etc)? I intend to make it sharp, then immediately heat and coat with flux & solder. Should I not do this for any reason?
"Man is the most insane species. He worships an invisible god and destroys a visible nature. Unaware that this nature he's destroying is this god he's worshipping." - Hubert Reeves
-
- Stagg
- Posts: 27
- Joined: Mon Mar 17, 2014 1:21 pm
Re: Soldering Iron recommendations
From what little I know (received wisdom, all of it) using anything abrasive on a tip will expose the copper core of the iron and that's no good no how.GrantB wrote:Not wanting to hijack your thread OP, but can anyone tell if it is OK to grind a new sharp point on my big mofo of a soldering iron (the one I use to do grounding for pots etc)? I intend to make it sharp, then immediately heat and coat with flux & solder. Should I not do this for any reason?
- Reg18
- Vintage Post Junkie
- Posts: 3703
- Joined: Thu Feb 06, 2014 1:57 pm
- Has liked: 320 times
- Been liked: 949 times
Re: Soldering Iron recommendations
This was tread I started and I ended up going for a Jaycar Duratech one like thisVince wrote:There's a thread on it here but I've not looked inside.
http://nzguitars.com/forum/viewtopic.php?f=42&t=29873
http://www.jaycar.co.nz/Tools-%26-Solde ... n/p/TS1620
Seems ok so far but I only do occasional pickup swaps etc so it hasn't had much use.
But I think you need to spend $150+ to get anything proper!
- Danger Mouse
- Vintage Post Junkie
- Posts: 11578
- Joined: Mon Oct 16, 2006 3:32 pm
- Location: Jafa Land
- Has liked: 354 times
- Been liked: 666 times
Re: Soldering Iron recommendations
Yeah there's always the big Weller option, buy once, buy for life etc... unless you're me and lose your $500 soldering station in a house move somehow. But unless you're regularly soldering, there's no point in that investment.
May I ask what solder you're using?
May I ask what solder you're using?
The older I get, the more disappointed in myself I become.
-
- Stagg
- Posts: 27
- Joined: Mon Mar 17, 2014 1:21 pm
Re: Soldering Iron recommendations
Something from Surplustronics, a little tube of lead-free solder from memory. Is that the issue you think?Danger Mouse wrote:Yeah there's always the big Weller option, buy once, buy for life etc... unless you're me and lose your $500 soldering station in a house move somehow. But unless you're regularly soldering, there's no point in that investment.
May I ask what solder you're using?
- Danger Mouse
- Vintage Post Junkie
- Posts: 11578
- Joined: Mon Oct 16, 2006 3:32 pm
- Location: Jafa Land
- Has liked: 354 times
- Been liked: 666 times
Re: Soldering Iron recommendations
And there is the issue exactly, you can vary the price of the iron according to the use it will get and purpose, but ALWAYS buy the best solder you can get. A good 60/40 tin/lead solder will make a world of difference.
1st rule of soldering, never use lead-free. Ever.
You don't need a new iron
1st rule of soldering, never use lead-free. Ever.
You don't need a new iron
The older I get, the more disappointed in myself I become.
-
- Stagg
- Posts: 27
- Joined: Mon Mar 17, 2014 1:21 pm
Re: Soldering Iron recommendations
Thank you kindly.Danger Mouse wrote:And there is the issue exactly, you can vary the price of the iron according to the use it will get and purpose, but ALWAYS buy the best solder you can get. A good 60/40 tin/lead solder will make a world of difference.
1st rule of soldering, never use lead-free. Ever.
You don't need a new iron
- alanp
- Vintage Post Junkie
- Posts: 4637
- Joined: Thu Dec 18, 2008 10:51 am
- Location: Wanganui
- Has liked: 4 times
- Been liked: 11 times
- Contact:
Re: Soldering Iron recommendations
I use a cheapo Dick Smith 40W pencil iron, I think it was less than twenty bucks.
It's soldered everything from damn-fiddly surface mount work to valve amps.
Technique and type of solder is massively important, more so IMO than how much your iron cost.
It's soldered everything from damn-fiddly surface mount work to valve amps.
Technique and type of solder is massively important, more so IMO than how much your iron cost.
Capt. Black wrote:Call me if you're looking for the sound of a sows ear made from a silk purse with a side of hot bitches and alcohol
- Bg
- Site Admin
- Posts: 43345
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2269 times
- Been liked: 3923 times
Re: Soldering Iron recommendations
might struggle getting one the same though eh... as dse stopped doing electronics a few years back and I seem to recall seeing something in the news about them recently. Can't remember what though...
Mines a DSE, I bought a few spare tips for it when I got it just in case. All I have to do is find them.
I would have thought RS Components or Farnell stock Weller though? There was a shop down the road in ellerslie that used to do Weller, so they are obtainable locally. I just don't use an iron enough to buy a station.
Mines a DSE, I bought a few spare tips for it when I got it just in case. All I have to do is find them.
I would have thought RS Components or Farnell stock Weller though? There was a shop down the road in ellerslie that used to do Weller, so they are obtainable locally. I just don't use an iron enough to buy a station.
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- JHorner
- Vintage Post Junkie
- Posts: 3167
- Joined: Wed Nov 12, 2014 5:45 pm
- Location: Auckland
- Has liked: 394 times
- Been liked: 488 times
Re: Soldering Iron recommendations
I bought this: http://www.jaycar.co.nz/Tools-%26-Solde ... n/p/TS1540
And this: http://www.jaycar.co.nz/Tools-%26-Solde ... m/p/NS3005
So far, it has worked.
And this: http://www.jaycar.co.nz/Tools-%26-Solde ... m/p/NS3005
So far, it has worked.
- sizzlingbadger
- Vintage Post Junkie
- Posts: 8297
- Joined: Sat Jan 15, 2011 7:12 am
- Location: Wire Wrapper
- Has liked: 1213 times
- Been liked: 1407 times
Re: Soldering Iron recommendations
I have a Weller solder station, its about 20 yrs old now but is very good. RS Components stock them. I also have a huge roll of decent solder, again about 20yrs old but still going strong.
I also have a fancy temp controlled Weller solder station with two pencils too but I never use it, most of my work is on valve amps so its a bit on the small side.
A good iron will give you consistent results, the Weller is great at this as it uses a mechanical plunger to heat the tip. Iron coated copper tips are best too.
I also have a fancy temp controlled Weller solder station with two pencils too but I never use it, most of my work is on valve amps so its a bit on the small side.
A good iron will give you consistent results, the Weller is great at this as it uses a mechanical plunger to heat the tip. Iron coated copper tips are best too.
Tube amp and guitar tones straight from 1958… amazing how believable the sounds were back then, even without the modellers...
- Anvil Amps Alan
- Gibson
- Posts: 799
- Joined: Thu May 14, 2009 11:52 am
- Location: Auckland (Howick)> Paeroa
- Been liked: 89 times
Re: Soldering Iron recommendations
Weller. Cheaper to buy just the iron without the blue power box, the power supply is simply a 24vac (2 amp or higher) transformer which is easy to find cheap.
The iron itself houses the magnetic thermostat and the temperature range is governed by the tip selected.They are numbered)
CE Distribution sell a good range of tips for about USD $ 4.50 a piece.
I once set up a production workbench with six 24 volt ac jacks along it connected to a 10 Amp 24V transformer.
I used 1/4 inch jack plugs to connect the irons.
The iron itself houses the magnetic thermostat and the temperature range is governed by the tip selected.They are numbered)
CE Distribution sell a good range of tips for about USD $ 4.50 a piece.
I once set up a production workbench with six 24 volt ac jacks along it connected to a 10 Amp 24V transformer.
I used 1/4 inch jack plugs to connect the irons.
"Political correctness is a doctrine, fostered by a
delusional, illogical minority, and rabidly promoted by an
unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end"
delusional, illogical minority, and rabidly promoted by an
unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end"