NZGuitars.com

sizzlingbadger wrote: ↑Thu Dec 07, 2023 8:59 am Faceplate before and after, I purposely went with a slightly bolder text. I also put the original rubberised knobs back on, they were loose fitting so I had replaced them with set screw knobs, but now found a way to make them fit tight.


IMG_5956.jpeg


IMG_5971.jpeg

StrummersOfThunder wrote: ↑Thu Dec 07, 2023 9:11 am

sizzlingbadger wrote: ↑Thu Dec 07, 2023 8:59 am Faceplate before and after, I purposely went with a slightly bolder text. I also put the original rubberised knobs back on, they were loose fitting so I had replaced them with set screw knobs, but now found a way to make them fit tight.


IMG_5956.jpeg


IMG_5971.jpeg

Looks great
How did you go about it in the end ?

sizzlingbadger wrote: ↑Thu Dec 07, 2023 9:18 am

StrummersOfThunder wrote: ↑Thu Dec 07, 2023 9:11 am

sizzlingbadger wrote: ↑Thu Dec 07, 2023 8:59 am Faceplate before and after, I purposely went with a slightly bolder text. I also put the original rubberised knobs back on, they were loose fitting so I had replaced them with set screw knobs, but now found a way to make them fit tight.


IMG_5956.jpeg
Great result !
I need to get some printing done for the reverb tank face plates and I need a very thin face plate as the insulated jacks eat up the thread length on each socket.
I’m actually wondering about printing directly onto the chassis. Wonder if they would handle that?

IMG_5971.jpeg

Looks great
How did you go about it in the end ?

I created the template with https://www.frontpanelexpress.com/front-panel-designer, this took several hours to be honest and it was painstakingly difficult to get it accurate.

Then I took the original faceplate and the template files to Henri at Embrace Design in Tawa and he used this laser inking process https://www.laserbondingtech.com.

It was $106

The original text was just flaking off when you touched it. This laser bonded ink is really solid, I couldn't shift the test printing on the back of the panel.

Jay wrote: ↑Thu Dec 07, 2023 10:23 am I had mine printed straight on the chassis once but it only just fitted in the printer so to speak. I don't recommend it, buy some jacks with longer shaft and more thread

Slowy wrote: ↑Wed Dec 06, 2023 4:46 pm

Bg wrote: ↑Wed Dec 06, 2023 1:25 pm So workbench is now on the floor, now if only I had instructions like from ikea…..

Nice bits of Blackwood maybe I should just build some guitars out of it?

As long as it's strong and stable, a workbench doesn't care what it's made of. It's not furniture; don't waste beautiful wood on it.

clubhouse wrote: ↑Thu Dec 07, 2023 2:25 pm

Slowy wrote: ↑Wed Dec 06, 2023 4:46 pm

Bg wrote: ↑Wed Dec 06, 2023 1:25 pm So workbench is now on the floor, now if only I had instructions like from ikea…..

Nice bits of Blackwood maybe I should just build some guitars out of it?

As long as it's strong and stable, a workbench doesn't care what it's made of. It's not furniture; don't waste beautiful wood on it.

But it can be beautiful furniture and it can be a way to further refine your craft as the apprentice test pieces of yore were. I aspire to the time, skill and confidence to build something like this:

http://www.strazzafurniture.com/workbenches.html

Expediency in the age of power tool democracy doesn't have to be the only bottom line qualifier of a job well done. Granted, in this capitalist paradigm, time is money, but if time can be spent acquiring skill and confidence, happiness and story, then the measures of a job well done widen beyond economic expediency. A cool as fuck work-bench is as good a project to honour quality timber by as any and a legacy object to leave...like planting a tree and knowing you'll never be alive long enough to enjoy it's shade.

Yeah...then relic the fuck outta it in use and love doing it, and it, and the memory of it's maker and their story, will only gain mana

I'm currently enjoying quietly riving posts from tootara and the sound of a hand plane peeling shavings. My eye, my hand and a buzz that I get to repurpose tree bones for a purpose that many others will enjoy

clubhouse wrote: ↑Thu Dec 07, 2023 2:25 pm

Slowy wrote: ↑Wed Dec 06, 2023 4:46 pm

Bg wrote: ↑Wed Dec 06, 2023 1:25 pm So workbench is now on the floor, now if only I had instructions like from ikea…..

Nice bits of Blackwood maybe I should just build some guitars out of it?

As long as it's strong and stable, a workbench doesn't care what it's made of. It's not furniture; don't waste beautiful wood on it.

But it can be beautiful furniture and it can be a way to further refine your craft as the apprentice test pieces of yore were. I aspire to the time, skill and confidence to build something like this:

http://www.strazzafurniture.com/workbenches.html

Expediency in the age of power tool democracy doesn't have to be the only bottom line qualifier of a job well done. Granted, in this capitalist paradigm, time is money, but if time can be spent acquiring skill and confidence, happiness and story, then the measures of a job well done widen beyond economic expediency. A cool as fuck work-bench is as good a project to honour quality timber by as any and a legacy object to leave...like planting a tree and knowing you'll never be alive long enough to enjoy it's shade.

Yeah...then relic the fuck outta it in use and love doing it, and it, and the memory of it's maker and their story, will only gain mana

I'm currently enjoying quietly riving posts from tootara and the sound of a hand plane peeling shavings. My eye, my hand and a buzz that I get to repurpose tree bones for a purpose that many others will enjoy

Bg wrote: ↑Thu Dec 07, 2023 4:14 pm

clubhouse wrote: ↑Thu Dec 07, 2023 2:25 pm

Slowy wrote: ↑Wed Dec 06, 2023 4:46 pm

As long as it's strong and stable, a workbench doesn't care what it's made of. It's not furniture; don't waste beautiful wood on it.

But it can be beautiful furniture and it can be a way to further refine your craft as the apprentice test pieces of yore were. I aspire to the time, skill and confidence to build something like this:

http://www.strazzafurniture.com/workbenches.html

Expediency in the age of power tool democracy doesn't have to be the only bottom line qualifier of a job well done. Granted, in this capitalist paradigm, time is money, but if time can be spent acquiring skill and confidence, happiness and story, then the measures of a job well done widen beyond economic expediency. A cool as fuck work-bench is as good a project to honour quality timber by as any and a legacy object to leave...like planting a tree and knowing you'll never be alive long enough to enjoy it's shade.

Yeah...then relic the fuck outta it in use and love doing it, and it, and the memory of it's maker and their story, will only gain mana

I'm currently enjoying quietly riving posts from tootara and the sound of a hand plane peeling shavings. My eye, my hand and a buzz that I get to repurpose tree bones for a purpose that many others will enjoy

I love seeing less than paper thin shavings ejecting from my planes, JB - easy tiger.

I appreciate a dunger workbench, I contributed most of the scars to my dads workbench, the wood was unrecognizable after so many years wear and tear and motorbike engines being dismantled on it.

But I've wanted a decent hardwood workbench for over 25 years, ever since I started buying woodworking books and making tools. Now I have space and can do that, my old shitty table can take the bashing, I know I'll saw into it at some stage, I did that to the kwilla outdoor table at the old place, twice... yeah the missus was well impressed.

clubhouse wrote: ↑Thu Dec 07, 2023 2:25 pm

Slowy wrote: ↑Wed Dec 06, 2023 4:46 pm

Bg wrote: ↑Wed Dec 06, 2023 1:25 pm So workbench is now on the floor, now if only I had instructions like from ikea…..

Nice bits of Blackwood maybe I should just build some guitars out of it?

As long as it's strong and stable, a workbench doesn't care what it's made of. It's not furniture; don't waste beautiful wood on it.

But it can be beautiful furniture and it can be a way to further refine your craft as the apprentice test pieces of yore were. I aspire to the time, skill and confidence to build something like this:

http://www.strazzafurniture.com/workbenches.html

Expediency in the age of power tool democracy doesn't have to be the only bottom line qualifier of a job well done. Granted, in this capitalist paradigm, time is money, but if time can be spent acquiring skill and confidence, happiness and story, then the measures of a job well done widen beyond economic expediency. A cool as fuck work-bench is as good a project to honour quality timber by as any and a legacy object to leave...like planting a tree and knowing you'll never be alive long enough to enjoy it's shade.

Yeah...then relic the fuck outta it in use and love doing it, and it, and the memory of it's maker and their story, will only gain mana

I'm currently enjoying quietly riving posts from tootara and the sound of a hand plane peeling shavings. My eye, my hand and a buzz that I get to repurpose tree bones for a purpose that many others will enjoy

Bg wrote: ↑Thu Dec 14, 2023 5:47 pm And another workbench arrived