Definitely a guitar thread not keyboard related

[StrummersOfThunder]

Recap done
Had left over caps from the space echo
If I can get it back together I’ll test later
Having dirty thoughts about painting the enclosure metallic red tho

Candy Apple Red finish on that would look totes amazeballs!

So there are options for this I’ve found. I think a silver metallic then the candy apple red top coat. All in rattle cans
Fairly fun idea
May be a thing that happens

[StrummersOfThunder]

Very nice machine, I was after one of these before I picked up my Roland RD64. Still wouldn't mind the upgrade to 88 keys one day.

Have to admit playing with keys and guitar makes you feel like a bit of a drummer at load in... so many bits!

Yes I do have this concern
I was actually thinking the 73 would have Ben plenty for me
Still at least I have some spare keys and parts at each end of the piano if something breaks !

[codedog]

Recap done
Had left over caps from the space echo
If I can get it back together I’ll test later
Having dirty thoughts about painting the enclosure metallic red tho

Candy Apple Red finish on that would look totes amazeballs!

So there are options for this I’ve found. I think a silver metallic then the candy apple red top coat. All in rattle cans
Fairly fun idea
May be a thing that happens

What candy apple red rattle can have you found? Where from?

[StrummersOfThunder]

Candy Apple Red finish on that would look totes amazeballs!

So there are options for this I’ve found. I think a silver metallic then the candy apple red top coat. All in rattle cans
Fairly fun idea
May be a thing that happens

What candy apple red rattle can have you found? Where from?

https://linkuponline.co.nz/product/dna% ... 21641.htmx

[StrummersOfThunder]

Well, this is a pain.
The right output loss persists despite recap
Also, it’s noticeable thru headphones too
Any thoughts ?

[StrummersOfThunder]

My only thought is to not waste any more time on my rostered day off on this and to go surfing

[jeremyb]

Try replacing C78 & C79 as per this: https://www.sequencer.de/synthesizer/th ... se.164593/ there are some other ones suggested in the thread which may also be an issue

[StrummersOfThunder]

Try replacing C78 & C79 as per this: https://www.sequencer.de/synthesizer/th ... se.164593/ there are some other ones suggested in the thread which may also be an issue

Ah das is goood yah!!!

[codedog]

So there are options for this I’ve found. I think a silver metallic then the candy apple red top coat. All in rattle cans
Fairly fun idea
May be a thing that happens

What candy apple red rattle can have you found? Where from?

https://linkuponline.co.nz/product/dna% ... 21641.htmx

Yeah, I found that one a while ago. It seems they don't sell to public though.

[StrummersOfThunder]

Try replacing C78 & C79 as per this: https://www.sequencer.de/synthesizer/th ... se.164593/ there are some other ones suggested in the thread which may also be an issue

Do you see the cap value there ?

[calling card]

Have you tried voltage test somewhere of R side and same with L side. Generally old electro keys seem to suffer from bad connections first.

[StrummersOfThunder]

So there is poor output right across the thing on the right side. HEadphone, line out and xlr.
The germans seem to point out:
"The signal comes in on the left via C49/C51 (short arrows) Behind IC3A / 4A (vertical rectangular marking) is the common source point for all outputs including headphones. If the problem occurs equally on all outputs, C49/51 are broken"

I think ill replace the 47uF caps thru that section.

[StrummersOfThunder]

Have you tried voltage test somewhere of R side and same with L side. Generally old electro keys seem to suffer from bad connections first.

I can try this but I wouldnt know where to start !

[jeremyb]

Try replacing C78 & C79 as per this: https://www.sequencer.de/synthesizer/th ... se.164593/ there are some other ones suggested in the thread which may also be an issue

Do you see the cap value there ?

Checked the service manual, C78 is a 1000uF electrolytic but its on the circuit with the valve not the same schematic as shown by the OP... hmmm... looking for C79... might be worth replacing all the electrolytics on the boards...

[StrummersOfThunder]

Try replacing C78 & C79 as per this: https://www.sequencer.de/synthesizer/th ... se.164593/ there are some other ones suggested in the thread which may also be an issue

Do you see the cap value there ?

Checked the service manual, C78 is a 1000uF electrolytic but its on the circuit with the valve not the same schematic as shown by the OP... hmmm... looking for C79... might be worth replacing all the electrolytics on the boards...

Yeh im wondering....
But the germans had a good coment about the source of the signal split. Other caps are at their respective outs (line/xlr/headphones) and if they are all kaput then it would stand to reason that the central theory works
Having said that I dont have the right caps and im wondering if for the sake of low hassle I jsut do the whole board while I have it out