Voodoo JCM800 Fading between two distinctly different sounds
Moderators: Slowy, Capt. Black
- sopachrga
- Vintage Post Junkie
- Posts: 3391
- meble-kuchenne.warszawa.pl
- Joined: Mon Oct 31, 2005 3:26 pm
- Location: Christchurch
- Has liked: 16 times
- Been liked: 59 times
-
- Vintage Post Junkie
- Posts: 4028
- Joined: Tue Nov 08, 2005 8:50 am
- Location: Wellington
No its not your old one, Has been put to early 70's specs (Much better than the bright stock sound.thehenderson wrote:Does you 1987 plexi 800 thingy have a little flag sticker thing near the on button?
And BTW im the one with no friends asking the stupid questions
70's/80's Retro & Rack Gear Hoarder and Part-Time Cork Sniffing Tone Junky .
-
- Vintage Post Junkie
- Posts: 4028
- Joined: Tue Nov 08, 2005 8:50 am
- Location: Wellington
-
- Stagg
- Posts: 51
- Joined: Mon Jul 18, 2005 9:51 pm
i added u.sopachrga wrote:Cool. I'm logged on to messenger now, and it has not popped up telling me Youv'e added me. So if you have already done it, you may want to confirm you have the hotmail address right.
note: it has 3 "0"'s. Which is a bit odd....
try adding me munkywrench86@hot...
Better do this soon cos I want to sell the marshall now.
I'm gonna try take the plunge and go for the Randall MTS on trademe at the moment.
No. I did the 'Parkhead Mod' so it sounds much ballsier at lower volumes.thehenderson wrote:Do you use a powerbrake with your amp?
In saying that I mostly run it on 10 and aim the cabinet away depnding on my volume needs.
I also sold my 1960a and got a JCM800 1936 which helped dump some volume but none of the Balls. It's actually a tighter sounding cab
70's/80's Retro & Rack Gear Hoarder and Part-Time Cork Sniffing Tone Junky .
-
- Stagg
- Posts: 51
- Joined: Mon Jul 18, 2005 9:51 pm
Holy shit, it didn't do this before, but I turned the volume up more than usual today and noticed the left EL34 was glowing red hot. I don't mean just a little. The whole thing. Hmm maybe I need new tubes after all.sopachrga wrote:Simple questions first.
Have you made sure that all of the tubes are seated well and plugged in good and snug?
During the sound change, have you looked at the tubes to see if maybe they change in colour at all (glow brighter, dim etc)?
If all else fails, you may be better off going to a decent amp tech and getting it checked over.
Gonna get Guy to go over it fully now. eek.
- Bg
- Site Admin
- Posts: 43457
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2279 times
- Been liked: 4012 times
-
- Stagg
- Posts: 51
- Joined: Mon Jul 18, 2005 9:51 pm
lol,
I did that (trademe) in a fit of frustration, really. But I'll leave it up for now.
It is a great amp and better than the mesa I had before, but I'm gonna move to something a little more modern if I can. Definitely EL34 tho.
I updated the add with the faults it has at the moment. Hopefully Guy will email me back so I can get this thing in top shape again.
I did that (trademe) in a fit of frustration, really. But I'll leave it up for now.
It is a great amp and better than the mesa I had before, but I'm gonna move to something a little more modern if I can. Definitely EL34 tho.
I updated the add with the faults it has at the moment. Hopefully Guy will email me back so I can get this thing in top shape again.
Problem is Modern = No Tone/Poor Quality Construction.MunkyWrench wrote:but I'm gonna move to something a little more modern if I can.
Whatevers wrong with your amp will be quite simple, Believe me.
Also I will most likely throw a bit of stuff on Trade Me this weekend and that may include the RAT 2.
Will check for that thing you wanted if I do
70's/80's Retro & Rack Gear Hoarder and Part-Time Cork Sniffing Tone Junky .
-
- Stagg
- Posts: 51
- Joined: Mon Jul 18, 2005 9:51 pm
That's a myth. You just have to choose your products. A lot of people believe handwired = god-like quality. It's false. Hand-wiring = unreliable reproduction, and quality DESIGNED printed circuits are reliably reproduced, as well as cheaper, less likely to fail etc. So called "Tone-junkies" are snobs and not really onto the facts. Just following the myths like any other trend.1987 NMV wrote: Problem is Modern = No Tone/Poor Quality Construction.
Try to convince the high end modern amp manufacturers that they have no tone and no quality.