Which electrical contact cleaner for amp pots?

[Kiwiaxe]

My Bogner has a scratchy volume pot. Which contact cleaner should I buy and use?

[NippleWrestler]

CRC contact cleaner has been cleaning my amp pots and tube sockets for years. I also use CRC electrical lubricant on the pots too.

[RectifiedAmps]

CRC seems to be the ‘gold standard’ but there are generic electrical contact cleaners that will clean & lube your pots. Jaycar has one that I’ve used and it definitely does the job. Using just a contact cleaner spray (isopropanol usually) is not a good idea unless you use it sparingly, otherwise they can dry out the pots. WD40 is not really a good idea but some do use it without problems.

[Kiwiaxe]

CRC seems to be the ‘gold standard’ but there are generic electrical contact cleaners that will clean & lube your pots. Jaycar has one that I’ve used and it definitely does the job. Using just a contact cleaner spray (isopropanol usually) is not a good idea unless you use it sparingly, otherwise they can dry out the pots. WD40 is not really a good idea but some do use it without problems.

Ta - I’ve got some jaycar stuff so I’ll try that

[MrDINO]

My Bogner has a scratchy volume pot. Which contact cleaner should I buy and use?

What Bogner ?

[FuzzMonkey]

Just don't use the regular CRC 5.56 or WD-40. These were the ones recommended earlier.

CRC CO Contact Cleaner:
https://www.crc.co.nz/catalog/product/v ... egory/912/

CRC 5-56 Electrical:
https://www.crc.co.nz/crc-5-56-electrical-420ml.html

Bunnings and Mitre-10 carry both.

[Kiwiaxe]

My Bogner has a scratchy volume pot. Which contact cleaner should I buy and use?

What Bogner ?

New Yorker combo

[sizzlingbadger]

I use the Jaycar one, it seems fine to me.

https://www.jaycar.co.nz/contact-cleane ... n/p/NA1012

[MikeC]

I use the Jaycar one, it seems fine to me.

https://www.jaycar.co.nz/contact-cleane ... n/p/NA1012

Ditto.

[Kiwiaxe]

Thanks. Seems to have fixed the issue I was having with the Bogner volume pot

Interestingly, my recollection is that this amp has been on this forum previously and was described as having had the schizo rotary switch upgraded to have more options. Turns out that was not the case - rather, the washer that sets the number of positions had been knocked out of place so instead of just having 4 positions, it went the full 12. But 2 did nothing and the other 8 was just 2 sets of the same 4. All corrected now

[Lyle]

I use the Jaycar one, it seems fine to me.

https://www.jaycar.co.nz/contact-cleane ... n/p/NA1012

Ditto.

Me three! Cleaned up the pops and crackles in my old Jansen.

[johnstratiwant]

I use the Jaycar one, it seems fine to me.

https://www.jaycar.co.nz/contact-cleane ... n/p/NA1012

Ditto.

Me three! Cleaned up the pops and crackles in my old Jansen.

I used it too and worked well

[jhyang549]

Ditto.

Me three! Cleaned up the pops and crackles in my old Jansen.

I used it too and worked well

Worked really well for me too. Great cheaper alternative to Deoxit.

[Dharmajester]

Deoxit do a version called I think fader cleaner. Intended for mixing desk faders etc. I have been informed that other cleaners leave a residue. The fader cleaner doesn't. It is of course ridiculously expensive, as is the postage from the US..

[FuzzMonkey]

Deoxit do a version called I think fader cleaner. Intended for mixing desk faders etc. I have been informed that other cleaners leave a residue. The fader cleaner doesn't. It is of course ridiculously expensive, as is the postage from the US..

These are based in New Zealand and carry the Deoxit range:

https://www.synergyelectronics.co.nz/st ... l-cleaning

You need to pay the delivery charge for Dangerous Goods if you buy the aerosol cans.