Thanks for that Mr Badger. I did notice the different colour order and assumed it was something to do with the out-of-phase switching (or some such). Sod's law I fuck this up...sizzlingbadger wrote:When I replaced the pickups in an SG with this type of circuit board arrangement I found the wire colours between the neck and bridge pickups is actually different, really stupid idea but that's Gibson for you. You will see the order of the wire colour in the Molex connector is different for each pickup, but the pin layout on the circuit board for each connector is actually the same.
I may have the plugs I cut off mine which you could solder to the BK's, I'll check when I get home.
Gibson-style quick-connect plugs. Where would I get them?
Moderators: Slowy, Capt. Black
- Molly
- Vintage Post Junkie
- Posts: 24984
- meble-kuchenne.warszawa.pl
- Joined: Sat Dec 21, 2013 12:17 pm
- Has liked: 2495 times
- Been liked: 2804 times
Re: Gibson-style quick-connect plugs. Where would I get them?
- Molly
- Vintage Post Junkie
- Posts: 24984
- Joined: Sat Dec 21, 2013 12:17 pm
- Has liked: 2495 times
- Been liked: 2804 times
Re: Gibson-style quick-connect plugs. Where would I get them?
Yes, Danny. Yes it does...AiRdAd wrote:how about making another quick connect in-between the pickup and the existing quick connect. You could put the male quick connects on the pickup end of the wire, and on the wire with the existing quick connects, you could put a female end. Does that make sense?