Baffled by beginning to build a baffle
Moderators: Slowy, Capt. Black
- TmcB
- I may have a problem
- Posts: 7795
- meble-kuchenne.warszawa.pl
- Joined: Fri Aug 22, 2008 12:17 pm
- Location: Kapiti
- Has liked: 683 times
- Been liked: 578 times
Baffled by beginning to build a baffle
Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo.
Anyway, because I can't ever leave any gear alone ever in my whole life, I'm wanting to make a new baffle for my '68 Custom Deluxe Reverb to take two 10 inch speakers,
something like this:
The idea is to make it a mini Vibrolux.
Any tips or advice? (Or desire to render services?)
I am totes noob when it comes to woodworking.
Anyway, because I can't ever leave any gear alone ever in my whole life, I'm wanting to make a new baffle for my '68 Custom Deluxe Reverb to take two 10 inch speakers,
something like this:
The idea is to make it a mini Vibrolux.
Any tips or advice? (Or desire to render services?)
I am totes noob when it comes to woodworking.
Family Music Store - http://familymusic.co.nzGrantB wrote:Tony, your taste is, as always, very refined. Or as HG would say, "bloody awful".
- Lawrence
- Vintage Post Junkie
- Posts: 1486
- Joined: Wed Jan 31, 2007 4:00 pm
- Location: Beta Canum Venaticorum
- Has liked: 37 times
- Been liked: 605 times
Re: Baffled by beginning to build a baffle
hey Tony, I have some of that grill cloth if you are interested.
GrantB wrote:
“You might be cool, but you’ll never be playing a white Steinberger through a JC120, wearing a white jumpsuit with white shoes and sporting a mullet cool”.
“You might be cool, but you’ll never be playing a white Steinberger through a JC120, wearing a white jumpsuit with white shoes and sporting a mullet cool”.
- jeremyb
- Chorus of Organs
- Posts: 41864
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7926 times
- Been liked: 4268 times
Re: Baffled by beginning to build a baffle
Jigsaw plus a piece of ply, drill some holes, staple on the grill cloth, job done!
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
-
- Vintage Post Junkie
- Posts: 4964
- Joined: Wed Jan 14, 2009 5:53 pm
- Location: Auckland
- Has liked: 171 times
- Been liked: 105 times
- NippleWrestler
- Vintage Post Junkie
- Posts: 2991
- Joined: Sat Jan 02, 2016 5:05 pm
- Has liked: 81 times
- Been liked: 1091 times
Re: Baffled by beginning to build a baffle
Use the best ply you can find (marine is the bomb). Check the grading as lower grade ply has solid faces but shitty insides which will vibrate and dick with the air pressure in the cab. Then it's literally just drilling the holes to mount the speakers.
- Polar Bear
- Burns BHM
- Posts: 6305
- Joined: Wed Sep 10, 2003 12:53 am
- Location: Wellington
- Has liked: 340 times
- Been liked: 342 times
Re: Baffled by beginning to build a baffle
Reissue.Aquila Rossa wrote:You are hacking up a vintage 68 Fender?
Zephyr - Wellington's Leading Covers Band
http://zephyrband.co.nz/
https://www.facebook.com/ZephyrBandNZ
http://zephyrband.co.nz/
https://www.facebook.com/ZephyrBandNZ
- Cdog
- Vintage Post Junkie
- Posts: 4408
- Joined: Wed Feb 07, 2007 3:01 pm
- Location: Christchurch
- Has liked: 3573 times
- Been liked: 732 times
Re: Baffled by beginning to build a baffle
YouTube. I watched a cool series by 'Uncle Doug' that went through the whole process of scratch building a combo. Id recommend using thin (2-3mm) thick offset strip around the edge of the baffle under the grill to keep it from vibrating against the baffle during your chugging riffs.
- Cdog
- Vintage Post Junkie
- Posts: 4408
- Joined: Wed Feb 07, 2007 3:01 pm
- Location: Christchurch
- Has liked: 3573 times
- Been liked: 732 times
Re: Baffled by beginning to build a baffle
[url]https://youtu.be/BQ1H3_uv2uE[url]
This is one of the vids from that series, the others may be helpful also. Uncle Doug is a bonafide good rooster. Learned heaps from his videos
This is one of the vids from that series, the others may be helpful also. Uncle Doug is a bonafide good rooster. Learned heaps from his videos
- Bg
- Site Admin
- Posts: 43457
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2279 times
- Been liked: 4012 times
Re: Baffled by beginning to build a baffle
Whats in there at present? 1x12? the good thing is you can use the existing baffle as a pattern. As far as woodworking is concerned, you could ask bunnings/mitre10 to rip your plywood to the correct size, then you just need to mark out the holes and cut them out with a jigsaw. You definitely want some spacers between the baffle and cloth - just a piece of 6mmx20mm round the edge and down the centre. I like to use thinner ply on fender style cabs - maybe 8-10mm max as part of the tone comes from the flexing. Keep the bigger stuff for marshall/boogie style cabs.
Dampen the cloth before you fit it - it'll tighten up when it dries. Use a staple gun to staple the overlapped cloth on the back etc... You can get the captive nuts from mitre10, these will be going on the front of the baffle - behind the cloth - and are pulled into the wood when you tighten the screws. So remember to paint them black else they stand out like dogs balls.
Dampen the cloth before you fit it - it'll tighten up when it dries. Use a staple gun to staple the overlapped cloth on the back etc... You can get the captive nuts from mitre10, these will be going on the front of the baffle - behind the cloth - and are pulled into the wood when you tighten the screws. So remember to paint them black else they stand out like dogs balls.
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- TmcB
- I may have a problem
- Posts: 7795
- Joined: Fri Aug 22, 2008 12:17 pm
- Location: Kapiti
- Has liked: 683 times
- Been liked: 578 times
Re: Baffled by beginning to build a baffle
Magic, thanks Beeg!Bg wrote:Whats in there at present? 1x12? the good thing is you can use the existing baffle as a pattern. As far as woodworking is concerned, you could ask bunnings/mitre10 to rip your plywood to the correct size, then you just need to mark out the holes and cut them out with a jigsaw. You definitely want some spacers between the baffle and cloth - just a piece of 6mmx20mm round the edge and down the centre. I like to use thinner ply on fender style cabs - maybe 8-10mm max as part of the tone comes from the flexing. Keep the bigger stuff for marshall/boogie style cabs.
Dampen the cloth before you fit it - it'll tighten up when it dries. Use a staple gun to staple the overlapped cloth on the back etc... You can get the captive nuts from mitre10, these will be going on the front of the baffle - behind the cloth - and are pulled into the wood when you tighten the screws. So remember to paint them black else they stand out like dogs balls.
Family Music Store - http://familymusic.co.nzGrantB wrote:Tony, your taste is, as always, very refined. Or as HG would say, "bloody awful".
- Bg
- Site Admin
- Posts: 43457
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2279 times
- Been liked: 4012 times
Re: Baffled by beginning to build a baffle
give me a shout if you get stuck finding nuts, I might have a few spare lying around - think I had a box full at one point. Oh and don't forget to paint the baffle black, after you've cut the speaker holes....
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- Reg18
- Vintage Post Junkie
- Posts: 3729
- Joined: Thu Feb 06, 2014 1:57 pm
- Has liked: 322 times
- Been liked: 964 times
Re: Baffled by beginning to build a baffle
Rather than start a new thread thought I'd piggy back on this one, about to get underway building a 1x12 and was going to go traditional Fender style floating baffle (screws at top and bottom) but am reconsidering now as I've read it cuts a bit of bass.
The 1x12 is at this stage going to be used with a Tweed style amp but I'd like it universal enough that if I want to put a Marshall or something else through it, it's going to still sound great.
Does it make much difference?
The last cab I made it was screwed in on all sides and it sounded great with pretty much any amp I tried through it but maybe a Fender floating baffle wouldn't make any noticeably difference?
The 1x12 is at this stage going to be used with a Tweed style amp but I'd like it universal enough that if I want to put a Marshall or something else through it, it's going to still sound great.
Does it make much difference?
The last cab I made it was screwed in on all sides and it sounded great with pretty much any amp I tried through it but maybe a Fender floating baffle wouldn't make any noticeably difference?
-
- Gibson
- Posts: 709
- Joined: Sat May 23, 2009 4:32 am
- Location: See 'tubeswell' in the phone book
- Has liked: 64 times
- Been liked: 65 times
Re: Baffled by beginning to build a baffle
FWIW I know its sounds obvious but, for 10" speakers you want 9" diameter holes (with a minimum 2" spacing between them)
He who dies with the most toobs... wins
- Bg
- Site Admin
- Posts: 43457
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2279 times
- Been liked: 4012 times
Re: Baffled by beginning to build a baffle
you may be just a tad late to this party.....
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.