The one cool thing that the UA OX doesn't do, is it does't have an amp like the Freyette powerstation. The other stuff it does is amazing though isn't it.Voxshall wrote:My vote goes to UA OX, you can get a pretty sweet cranked amp tone through headphones and its handy for recording and gigs it's all a compromise depends how much good tone and more feel of the amp means to you.
Any thoughts re: attenuators?
Moderators: Slowy, Capt. Black
- AiRdAd
- Vintage Post Junkie
- Posts: 7790
- meble-kuchenne.warszawa.pl
- Joined: Sat Jul 04, 2009 2:33 pm
- Has liked: 57 times
- Been liked: 702 times
Re: Any thoughts re: attenuators?
Slowy wrote: To Danny, everyone is either a supplier, customer or a courier.
- calling card
- Vintage Post Junkie
- Posts: 4307
- Joined: Fri Nov 23, 2007 10:56 am
- Location: Hoodoo dump, BOP
- Has liked: 867 times
- Been liked: 276 times
Re: Any thoughts re: attenuators?
I have master volume added to my 1987x, it sounds like preamp valves not power stage marshall voice of...willow13 wrote:If your amp has a master volume then I think they are kind of pointless
2024; I have explored the extent of the perimeter dome, there is no escape. I am become Morpheus
- calling card
- Vintage Post Junkie
- Posts: 4307
- Joined: Fri Nov 23, 2007 10:56 am
- Location: Hoodoo dump, BOP
- Has liked: 867 times
- Been liked: 276 times
Re: Any thoughts re: attenuators?
O.K so I'm down this attenuator rabbit hole, power valves of my brain are stressed just trying to find who has what.
I search the online Rockshop and get a ton of junk unrelated to a good power soak (load box?) kind of thing. Am I doing it wrong?
We have cheaper resistor things like THD Hotplate, KLD PB1, THD seem to be fading and KLD from where?
More spendy;
Jetenuator
Bugera power soak
Two note torpedo
Rivera rockcrusher
Weber mass (the big one)
More thoughts? don't know much about the recording thing. Just want to plug in and play and a bit louder than BR level but not excruciating.
I search the online Rockshop and get a ton of junk unrelated to a good power soak (load box?) kind of thing. Am I doing it wrong?
We have cheaper resistor things like THD Hotplate, KLD PB1, THD seem to be fading and KLD from where?
More spendy;
Jetenuator
Bugera power soak
Two note torpedo
Rivera rockcrusher
Weber mass (the big one)
More thoughts? don't know much about the recording thing. Just want to plug in and play and a bit louder than BR level but not excruciating.
2024; I have explored the extent of the perimeter dome, there is no escape. I am become Morpheus
- griff
- Vintage Post Junkie
- Posts: 1758
- Joined: Sun Feb 12, 2017 6:57 pm
- Has liked: 503 times
- Been liked: 249 times
Re: Any thoughts re: attenuators?
The Rockshop don't have much to choose from apart from the spendy Ox Amp.
Depends how fussy you are with tone because you could go with one of those spendy ones you mentioned, or go cheap and go resistive. Type 'Attenuator' in Reverb.com and there's heaps to choose from. Some are only $100 or so that will do the job.
Depends how fussy you are with tone because you could go with one of those spendy ones you mentioned, or go cheap and go resistive. Type 'Attenuator' in Reverb.com and there's heaps to choose from. Some are only $100 or so that will do the job.
- chur
- Vintage Post Junkie
- Posts: 1269
- Joined: Sun Aug 02, 2009 4:05 pm
- Location: Christchurch
- Has liked: 169 times
- Been liked: 210 times
Re: Any thoughts re: attenuators?
You could look at Attenuator/Reampers also -calling card wrote:O.K so I'm down this attenuator rabbit hole, power valves of my brain are stressed just trying to find who has what.
I search the online Rockshop and get a ton of junk unrelated to a good power soak (load box?) kind of thing. Am I doing it wrong?
We have cheaper resistor things like THD Hotplate, KLD PB1, THD seem to be fading and KLD from where?
More spendy;
Jetenuator
Bugera power soak
Two note torpedo
Rivera rockcrusher
Weber mass (the big one)
More thoughts? don't know much about the recording thing. Just want to plug in and play and a bit louder than BR level but not excruciating.
Bad Cat Unleash v2
Fryette Power Station
Ultimate Attenuator
Some of these have effects loops also, which is handy if you have an old Skool amp that doesn't have one.
You could also grab a Torpedo Captor which I see someone on here is selling, and run that to one of those little amplifier pedal units. If I were going pure reactive attenuator, the Rockcrusher seems to be popular.
No one ever died of hard work.. but why take the risk..
- Terexgeek
- Vintage Post Junkie
- Posts: 4617
- Joined: Sat Sep 02, 2006 11:12 pm
- Location: Christchurch
- Has liked: 1224 times
- Been liked: 375 times
Re: Any thoughts re: attenuators?
There's the new Boss unit too? Pricing to be confirmed...
Tin arse!!
- calling card
- Vintage Post Junkie
- Posts: 4307
- Joined: Fri Nov 23, 2007 10:56 am
- Location: Hoodoo dump, BOP
- Has liked: 867 times
- Been liked: 276 times
Re: Any thoughts re: attenuators?
Favouring the idea of the Rockcrusher today, sweating on funding dump...
Still, cheaper than blown OT?
https://reverb.com/p/rivera-rockcrusher ... ash-16-ohm
Edit; Wow Weber Mass 100w for $397 kiwi https://reverb.com/p/weber-mass-100-100w-attenuator
Edit2; Sigh... so much gearpage, back to work...
Still, cheaper than blown OT?
https://reverb.com/p/rivera-rockcrusher ... ash-16-ohm
Edit; Wow Weber Mass 100w for $397 kiwi https://reverb.com/p/weber-mass-100-100w-attenuator
Edit2; Sigh... so much gearpage, back to work...
2024; I have explored the extent of the perimeter dome, there is no escape. I am become Morpheus
- chur
- Vintage Post Junkie
- Posts: 1269
- Joined: Sun Aug 02, 2009 4:05 pm
- Location: Christchurch
- Has liked: 169 times
- Been liked: 210 times
Re: Any thoughts re: attenuators?
These all come up cheaper on trademe from time to time. I think the last Rockcrusher I saw went for about 450.calling card wrote:Favouring the idea of the Rockcrusher today, sweating on funding dump...
Still, cheaper than blown OT?
https://reverb.com/p/rivera-rockcrusher ... ash-16-ohm
Edit; Wow Weber Mass 100w for $397 kiwi https://reverb.com/p/weber-mass-100-100w-attenuator
Edit2; Sigh... so much gearpage, back to work...
No one ever died of hard work.. but why take the risk..
- calling card
- Vintage Post Junkie
- Posts: 4307
- Joined: Fri Nov 23, 2007 10:56 am
- Location: Hoodoo dump, BOP
- Has liked: 867 times
- Been liked: 276 times
Re: Any thoughts re: attenuators?
Thanks! oh well best sit tight & see.
2024; I have explored the extent of the perimeter dome, there is no escape. I am become Morpheus
- Molly
- Vintage Post Junkie
- Posts: 25024
- Joined: Sat Dec 21, 2013 12:17 pm
- Has liked: 2504 times
- Been liked: 2821 times
Re: Any thoughts re: attenuators?
Haven't read the other posts but my experience of attenuators is that even the best of them don't sound as good as not using them at all. Bottom of the heap for me has been the Dr.Z examples (IMHO). Best has been the Tone King. THD was OK but they're impedance-specific so that might not be ideal.
- calling card
- Vintage Post Junkie
- Posts: 4307
- Joined: Fri Nov 23, 2007 10:56 am
- Location: Hoodoo dump, BOP
- Has liked: 867 times
- Been liked: 276 times
Re: Any thoughts re: attenuators?
I know...I bought a THD on impulse the other day & quickly realized I had a unit rated at 2.7 ohms and my application is 16 ohm. Still, half price compared to every where else I've looked. Apparently designed with Fender 4x10 in mind.
I'm thinking the reactive ones may be what to hunt down. I've always held off attenuators before because of tone suck comments but it's this or consign my tube beasts to the museum. Cracks me up, I see people using them on 5E3, this has been my soft home amp for a long time.
I'm thinking the reactive ones may be what to hunt down. I've always held off attenuators before because of tone suck comments but it's this or consign my tube beasts to the museum. Cracks me up, I see people using them on 5E3, this has been my soft home amp for a long time.
2024; I have explored the extent of the perimeter dome, there is no escape. I am become Morpheus
- H671
- Vintage Post Junkie
- Posts: 2338
- Joined: Fri Jun 08, 2012 12:33 pm
- Location: Auckland
- Has liked: 74 times
- Been liked: 266 times
Re: Any thoughts re: attenuators?
I tried to tell that turkey who was selling it, that it was rated at 2.7 Ohms, but he was too dishonest to disclose that fact because he knew not many people would buy it.calling card wrote:I know...I bought a THD on impulse the other day & quickly realized I had a unit rated at 2.7 ohms and my application is 16 ohm. Still, half price compared to every where else I've looked. Apparently designed with Fender 4x10 in mind.
I'm thinking the reactive ones may be what to hunt down. I've always held off attenuators before because of tone suck comments but it's this or consign my tube beasts to the museum. Cracks me up, I see people using them on 5E3, this has been my soft home amp for a long time.
Epiphone Riviera P93 & EJ200CE, Hagstrom Viking Bass, Doubleneck bass/guitar.
Rivera Clubster 45, Carvin AG100D, Ashton BSK158.
Rivera Clubster 45, Carvin AG100D, Ashton BSK158.
- Molly
- Vintage Post Junkie
- Posts: 25024
- Joined: Sat Dec 21, 2013 12:17 pm
- Has liked: 2504 times
- Been liked: 2821 times
Re: Any thoughts re: attenuators?
Green one, Christchurch seller? If it is I sold him that with full impedance disclosure. Intended for 3x10 Fenders I guess. I used it with a 4x10 Super Reverb and tried it with the 3x10 Victoria. When he subsequently listed it he ignored questions about its intended application.H671 wrote:I tried to tell that turkey who was selling it, that it was rated at 2.7 Ohms, but he was too dishonest to disclose that fact because he knew not many people would buy it.calling card wrote:I know...I bought a THD on impulse the other day & quickly realized I had a unit rated at 2.7 ohms and my application is 16 ohm. Still, half price compared to every where else I've looked. Apparently designed with Fender 4x10 in mind.
I'm thinking the reactive ones may be what to hunt down. I've always held off attenuators before because of tone suck comments but it's this or consign my tube beasts to the museum. Cracks me up, I see people using them on 5E3, this has been my soft home amp for a long time.
- olegmcnoleg
- Vintage Post Junkie
- Posts: 5591
- Joined: Sat Dec 21, 2013 11:26 am
- Location: Awkland
- Has liked: 870 times
- Been liked: 743 times
Re: Any thoughts re: attenuators?
He sure did, because I asked him exactly that.Molly wrote:When he subsequently listed it he ignored questions about its intended application.