Transformer sources?
Moderators: Slowy, Capt. Black
-
- Stagg
- Posts: 91
- meble-kuchenne.warszawa.pl
- Joined: Tue Nov 29, 2016 8:06 am
- Has liked: 26 times
- Been liked: 82 times
Transformer sources?
Hey folks,
I've been tossing around the idea of cobbling together a 5e3 at some point. I'm still in the info gathering phase, but it looks like the biggest challenge (apart from general lack of competence) would be sourcing a 230/240v power transformer.
Does anyone know of a local source, or overseas that won't cost a fortune in shipping, etc.?
Cheers,
Jay
I've been tossing around the idea of cobbling together a 5e3 at some point. I'm still in the info gathering phase, but it looks like the biggest challenge (apart from general lack of competence) would be sourcing a 230/240v power transformer.
Does anyone know of a local source, or overseas that won't cost a fortune in shipping, etc.?
Cheers,
Jay
Jay
- Jay
- Vintage Post Junkie
- Posts: 7881
- Joined: Sat Sep 25, 2010 9:35 pm
- Has liked: 1669 times
- Been liked: 1315 times
Re: Transformer sources?
Mouser... All been discussed in this thread....
viewtopic.php?f=41&t=35636&start=90
viewtopic.php?f=41&t=35636&start=90
When faced with quality, I recognise it every time.
Re: Transformer sources?
Thanks griff. This is still all a ways off yet, but out of interest, how much would you be after?
And do we know that this would be appropriate for a 5e3 build? (As you can see I am fairly clueless at this stage... I'll be learning on the job! When it comes time to build the cab I will be back in my element.)
And do we know that this would be appropriate for a 5e3 build? (As you can see I am fairly clueless at this stage... I'll be learning on the job! When it comes time to build the cab I will be back in my element.)
Jay
- griff
- Vintage Post Junkie
- Posts: 1757
- Joined: Sun Feb 12, 2017 6:57 pm
- Has liked: 503 times
- Been liked: 248 times
Re: Transformer sources?
Maybe $120 posted?
Not sure if it's appropriate or not, that would be something you would have to look into. Pretty sure it would be fine tho. Transformers have far less effect on tone than the design of the circuit itself. Just gotta make sure the specs of the tranny match your design.
I should be able to get the specs for the tranny from Doug at Jet City Amplification if you ever go down that road. I won't be selling it in a hurry, so keep me in mind.
Not sure if it's appropriate or not, that would be something you would have to look into. Pretty sure it would be fine tho. Transformers have far less effect on tone than the design of the circuit itself. Just gotta make sure the specs of the tranny match your design.
I should be able to get the specs for the tranny from Doug at Jet City Amplification if you ever go down that road. I won't be selling it in a hurry, so keep me in mind.
- sizzlingbadger
- Vintage Post Junkie
- Posts: 8334
- Joined: Sat Jan 15, 2011 7:12 am
- Location: Wire Wrapper
- Has liked: 1233 times
- Been liked: 1417 times
Re: Transformer sources?
Ah, there we go! That's actually surprisingly reasonable. Thanks for that; I find the mouser site a bit confusing at the best of times.sizzlingbadger wrote:https://nz.mouser.com/ProductDetail/Ham ... MMfg%3d%3d
Jay
- Jay
- Vintage Post Junkie
- Posts: 7881
- Joined: Sat Sep 25, 2010 9:35 pm
- Has liked: 1669 times
- Been liked: 1315 times
Re: Transformer sources?
That is the one I bought for the Jansen 4/12 Copy...
When faced with quality, I recognise it every time.
-
- Mr Echo
- Posts: 4488
- Joined: Wed Jun 08, 2005 7:33 am
- Location: East Coast
- Has liked: 367 times
- Been liked: 285 times
Re: Transformer sources?
That would be cyberton
https://en.m.wikipedia.org/wiki/Cybertron
https://en.m.wikipedia.org/wiki/Cybertron
"Cash on the ballot, money to burn, Dealey Plaza, make a left-hand turn" Bob Dylan is a genius
Re: Transformer sources?
Sure, but shipping is outrageous.Kev77 wrote:That would be cyberton
https://en.m.wikipedia.org/wiki/Cybertron
Jay