Everytime I buy a Katana, I promise myself that I'll build a tweed cab for it then run the higain amp all the timeDanger Mouse wrote: ↑Fri Jun 17, 2022 12:15 pmI've always wanted a face-melting modern high gain monster built into a tweed covered combo or mini head and 1x12.
What custom (MikeC) amp head?
Moderators: Slowy, Capt. Black
- Bg
- Site Admin
- Posts: 43457
- meble-kuchenne.warszawa.pl
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2279 times
- Been liked: 4013 times
Re: What custom (MikeC) amp head?
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- jeremyb
- Chorus of Organs
- Posts: 41875
- Joined: Sat Dec 06, 2008 9:03 am
- Has liked: 7930 times
- Been liked: 4268 times
Re: What custom (MikeC) amp head?
I’ve seen a katana which has been recovered in tweed!Danger Mouse wrote: ↑Fri Jun 17, 2022 12:15 pmI've always wanted a face-melting modern high gain monster built into a tweed covered combo or mini head and 1x12.
Slowy wrote: That's the problem; everything rewarding is just such hard work. Regret takes much less effort.
- GrantB
- ADMIN
- Posts: 16028
- Joined: Fri Oct 31, 2003 9:04 am
- Location: Where I need to be
- Has liked: 1395 times
- Been liked: 2137 times
Re: What custom (MikeC) amp head?
It's the one. I've had dozens of EL84 amps, incl. Morgan, Matchless, Vox (I've had maybe 10?), and the TC15, well at least my TC15, is the best of the bunch. Weird. I do have nice tubes in it including a Tesla EF86 which is a fire breathing monster of a tube, and it runs through a 20 year old Celestion Blue that has been thrashed...so, sum of all parts I suspect. And it's quiet, and tonally flexible. Mike's build quality is supreme.
But, you can't buy those kits anymore. Parts shortages or something.
These are excellent suggestions...I might add a Gibson Maestro w/octal preamps, a Fender Harvard or even a 5F11 and replace the front end with octals. I have NOS octals should you need them.
Exciting stuff.
"Man is the most insane species. He worships an invisible god and destroys a visible nature. Unaware that this nature he's destroying is this god he's worshipping." - Hubert Reeves
- robthemac
- Vintage Post Junkie
- Posts: 8868
- Joined: Sun Apr 28, 2019 3:47 pm
- Has liked: 1129 times
- Been liked: 1456 times
Re: What custom (MikeC) amp head?
Or a Roland JC120 in a Mesa treadplate shell.Danger Mouse wrote: ↑Fri Jun 17, 2022 12:15 pmI've always wanted a face-melting modern high gain monster built into a tweed covered combo or mini head and 1x12.
- StrummersOfThunder
- Vintage Post Junkie
- Posts: 7429
- Joined: Sun Jul 15, 2012 2:23 pm
- Has liked: 870 times
- Been liked: 1404 times
Re: What custom (MikeC) amp head?
Did they send the schematic with your tc15?GrantB wrote: ↑Fri Jun 17, 2022 12:59 pmIt's the one. I've had dozens of EL84 amps, incl. Morgan, Matchless, Vox (I've had maybe 10?), and the TC15, well at least my TC15, is the best of the bunch. Weird. I do have nice tubes in it including a Tesla EF86 which is a fire breathing monster of a tube, and it runs through a 20 year old Celestion Blue that has been thrashed...so, sum of all parts I suspect. And it's quiet, and tonally flexible. Mike's build quality is supreme.
But, you can't buy those kits anymore. Parts shortages or something.
These are excellent suggestions...I might add a Gibson Maestro w/octal preamps, a Fender Harvard or even a 5F11 and replace the front end with octals. I have NOS octals should you need them.
Exciting stuff.
- GrantB
- ADMIN
- Posts: 16028
- Joined: Fri Oct 31, 2003 9:04 am
- Location: Where I need to be
- Has liked: 1395 times
- Been liked: 2137 times
Re: What custom (MikeC) amp head?
Yep, and Mike will have one.StrummersOfThunder wrote: ↑Fri Jun 17, 2022 2:33 pmDid they send the schematic with your tc15?GrantB wrote: ↑Fri Jun 17, 2022 12:59 pmIt's the one. I've had dozens of EL84 amps, incl. Morgan, Matchless, Vox (I've had maybe 10?), and the TC15, well at least my TC15, is the best of the bunch. Weird. I do have nice tubes in it including a Tesla EF86 which is a fire breathing monster of a tube, and it runs through a 20 year old Celestion Blue that has been thrashed...so, sum of all parts I suspect. And it's quiet, and tonally flexible. Mike's build quality is supreme.
But, you can't buy those kits anymore. Parts shortages or something.
These are excellent suggestions...I might add a Gibson Maestro w/octal preamps, a Fender Harvard or even a 5F11 and replace the front end with octals. I have NOS octals should you need them.
Exciting stuff.
"Man is the most insane species. He worships an invisible god and destroys a visible nature. Unaware that this nature he's destroying is this god he's worshipping." - Hubert Reeves
- MikeC
- Vintage Post Junkie
- Posts: 3040
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1366 times
- Been liked: 914 times
Re: What custom (MikeC) amp head?
Yeah I do have the schematic & I've got a TC15 too. I could build you one except the OT is a specially wound Heyboer that had dual primary windings (5K & 8K) and as Grant says, Trinity seem to have stopped producing any kits. So won't be able to get that OT.
Whakanuia o mea kei a koe
- StrummersOfThunder
- Vintage Post Junkie
- Posts: 7429
- Joined: Sun Jul 15, 2012 2:23 pm
- Has liked: 870 times
- Been liked: 1404 times
- StrummersOfThunder
- Vintage Post Junkie
- Posts: 7429
- Joined: Sun Jul 15, 2012 2:23 pm
- Has liked: 870 times
- Been liked: 1404 times
Re: What custom (MikeC) amp head?
What effect would that have on the amp over all (if you had to substitute anther oT)?
- MikeC
- Vintage Post Junkie
- Posts: 3040
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1366 times
- Been liked: 914 times
Re: What custom (MikeC) amp head?
I'd go one with an 8K primary. I don't know how much it would effect the tone, probably not much but I'm guessing. I think Grant got the last one from Trinity. Check trinityamps.com. PS. Mine & Grant's TC15s were both kits from Trinity.
Whakanuia o mea kei a koe
- sizzlingbadger
- Vintage Post Junkie
- Posts: 8335
- Joined: Sat Jan 15, 2011 7:12 am
- Location: Wire Wrapper
- Has liked: 1233 times
- Been liked: 1418 times
-
- Vintage Post Junkie
- Posts: 1117
- Joined: Tue Aug 20, 2019 9:13 am
- Has liked: 280 times
- Been liked: 299 times
Re: What custom (MikeC) amp head?
+1 also for whoever mentioned the 200w Pig above - crank it through a single 120w cab…. good enough for Mick……
- Attachments
-
- 4F259EF3-EC57-4D5A-8FAC-F2F0B2BAFCB5.jpeg (377.09 KiB) Viewed 1329 times
- MikeC
- Vintage Post Junkie
- Posts: 3040
- Joined: Fri Sep 12, 2003 5:43 pm
- Location: Red Beach, Auckland
- Has liked: 1366 times
- Been liked: 914 times
Re: What custom (MikeC) amp head?
The 8K primary tap produced more power than the 5K. A replacement OT with an 8K primary would not change the power. The TC15 is only about 12 watts RMS clean - will it even fit your requirements?StrummersOfThunder wrote: ↑Fri Jun 17, 2022 6:36 pmWhat effect would that have on the amp over all (if you had to substitute anther oT)?
Whakanuia o mea kei a koe
- Conway
- Vintage Post Junkie
- Posts: 9860
- Joined: Mon Aug 29, 2011 1:33 pm
- Location: Auckland
- Has liked: 247 times
- Been liked: 966 times
- StrummersOfThunder
- Vintage Post Junkie
- Posts: 7429
- Joined: Sun Jul 15, 2012 2:23 pm
- Has liked: 870 times
- Been liked: 1404 times
Re: What custom (MikeC) amp head?
Perhaps notMikeC wrote: ↑Sat Jun 18, 2022 10:26 amThe 8K primary tap produced more power than the 5K. A replacement OT with an 8K primary would not change the power. The TC15 is only about 12 watts RMS clean - will it even fit your requirements?StrummersOfThunder wrote: ↑Fri Jun 17, 2022 6:36 pmWhat effect would that have on the amp over all (if you had to substitute anther oT)?