Hi, looking for someone to give me a hand fixing the wiring in my SG in exchange for a box of beersies.
I did a pickup swap with push/pull pots on the coil splitting, and it all works, but its a bit noisy, and its very ugly / messy. Need someone to take a look over and maybe redo any dodgy connections. I know this should be well within my abilities to do myself, but last time I just ended up with lots of burns on my fingers.
Bit of soldering help in AKL?
Moderators: Slowy, Capt. Black
- jimi
- Vintage Post Junkie
- Posts: 3410
- meble-kuchenne.warszawa.pl
- Joined: Thu Nov 25, 2004 2:23 pm
- Location: Auckland
- Has liked: 856 times
- Been liked: 361 times
- Bg
- Site Admin
- Posts: 43414
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2276 times
- Been liked: 3991 times
Re: Bit of soldering help in AKL?
Yeah dude, drop me a pm and arrange a time to drop it round, as I've a bit of time currently on my hands... I'll do it in between infomercials and Dr. Phil
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- Bg
- Site Admin
- Posts: 43414
- Joined: Fri Sep 05, 2003 12:13 am
- Location: Auckland
- Has liked: 2276 times
- Been liked: 3991 times
Re: Bit of soldering help in AKL?
certainly am, though theres a lot to be said for meths
So, is that low alcohol or no alcohol at all? mmmm, no alcohol, do you want to try it? Noooooooooo.
- Spykerwolf
- Tokai
- Posts: 487
- Joined: Mon May 03, 2010 1:33 pm
- Location: Auckland
- Has liked: 23 times
- Been liked: 11 times
Re: Bit of soldering help in AKL?
Tried different cables to eliminate that?
My amp buzzes when my soldering iron is plugged in as well, so just make sure that's not the case
My amp buzzes when my soldering iron is plugged in as well, so just make sure that's not the case